1 iGrafx Image Image 2 %d%% %s 3 Untitled 4 iGrafx Image 5 Image Destroyed aborting dialog session. 6 iGrafx Image Application already running. 7 - Recording a Macro... 8 - Playing a Macro... 9 Leave all image data on the clipboard? 10 Edits 11 on 12 Error occurred while printing. Check your software and hardware print connections. 13 Not enough memory to print. 14 Not enough disk space to print. 15 Printing cancelled. 16 Welcome to %s. 17 Save changes to '%s'? 18 The file '%s' is already open. Open as an Untitled image? 19 Are you sure you want to save the options for the %s? 20 In 21 Out 22 That brush is larger than %d pixels. The center portion will be used. 23 Is it OK to remove the mask so that processing will go faster? 24 You need to combine all objects with the base before performing that function. 25 You can only have a single object selected before performing that function. 26 Error writing to file. 27 File '%s' not found. 28 Error creating the file '%s'. for the new style. 29 '%s' is not TIFF version 4.2; will continue. 30 '%s' is a CCITT or Packbits TIFF image; cannot be opened. 31 '%s' is a TIFF image with non-standard photo interpretation (like color); will continue. 32 '%s' is a TIFF image with non-standard fill order; will continue. 33 '%s' is an oriented TIFF image; will continue. 34 Map input points must be in ascending order. 35 '%s' is not a valid TIFF image file. 36 '%s' is not a valid map file. 37 You have selected a non-PostScript printer along with a print style that specifies halftone and black generation settings. These settings are not used with non-PostScript printers. 38 '%s' is not an 11 point calibration map; cannot load. 39 '%s' is not a valid mask file. 40 Cannot load Color Manager Driver '%s'. 41 That function cannot be performed with this image. 42 Base Image 44 There is no image currently available 45 %d%% in 46 That image was not created by this complimentary copy of iGrafx Image. If you wish to read images created by scanners and other frame grabbers,you must purchase iGrafx Image from your local distributor. 47 iGrafx Image has detected a system change from the original program installation. You must reinstall the program to run in this new environment. This program will continue to run, but you cannot save image files. 48 Calibration measurements must be in ascending or descending order. Check that the mask is properly drawn. 49 Could not run the tutorial. 50 Are you sure you want to automatically update the GRAY column of measurements with readings taken from the rectangular image area? 51 Are you sure you want to automatically update the RED, GREEN, and BLUE columns of measurements with readings taken from the rectangular image area? 52 Are you sure you want to automatically update the CYAN, MAGENTA, YELLOW, and BLACK columns of measurements with readings taken from the rectangular image area? 53 Are you sure you want to automatically update the CYAN, MAGENTA, YELLOW, and BLACK columns of measurements with readings taken from the rectangular image area? 54 Processing Undo. 55 Unable to open clipboard file '%s'. 56 Error writing to clipboard file '%s'. 57 Is it OK to apply all your pending changes so that processing will go faster? 58 Error reading mask file '%s'. 59 You have selected a file type that does not support 16 bit data. Do you wish to continue ? 62 On 63 Off 64 Ready 65 Invalid clipboard format. 66 You have selected an effect that does not support CMYK images. You must first convert the image to RGB before applying this effect. 67 The size of the image you are creating exceeds your system's maximum - Please reduce the size before continuing. 68 Double click to change this color %s %s. 69 %s %s. 70 %ld pixels have an average of %s. 72 Error decoding the compressed image. 73 Do you wish to apply the effect? 74 [F1 for Help] 75 Double click to change this active color %s. 76 Click to activate this alternate color %s. 77 You have made changes to the palette.\nLose changes? 79 Unable to get Video or Frame Grab hardware error. 80 User canceled grab. 81 No printer selected. 82 Cannot load Windows driver '%s'. 83 Cannot open the scanner driver: %s. 84 Not enough memory to continue scanning! 85 Write failed on cache file in directory '%s'; try closing any images before continuing. 86 Cannot initialize the scanner: %s. 87 Cannot get the scanner environment: %s. 88 Cannot get the scanner attributes: %s. 89 Cannot set the scanner attributes: %s. 90 Cannot close the scanner properly: %s. 91 Cannot start a scan: %s. 92 Cannot get data from the scanner: %s. 93 Crop area is empty; cannot scan. 94 Number of gray levels found is %d. Maximum gray is %d. Minimum gray is %d. 106 The masked area is not within the selected preview area. Move the preview window to a position that includes the mask, or click the Mask In/Out button. 107 Cannot write file '%s', you are out of disk space. 108 There is no active mask. 109 There is no area to transform. 110 Are you sure you want to delete '%s' (%s)? 111 Replace existing extended file '%s'? 112 Not enough memory to create an Undo buffer. Undo will not work on some operations. 113 Nothing to erase. 114 You cannot erase editing that includes a size or a depth change. 115 Custom Brush '%s' does not exist. Do you want to create it? 116 Invalid palette file format: '%s'. 117 Palette named '%s' already exists. 118 The rectangle you have drawn on the step scale does not appear to surround all of the steps. 119 The rectangle you have drawn on the print scale does not appear to surround all of the steps. 120 You need to draw a rectangle over all the steps in a scanned step scale to measure. 121 You need to draw a rectangle over all the steps in a scanned print scale to measure. 122 Replace existing file '%s'? 123 Revert to last saved version of '%s'? 124 Scaling width by %s %%; Scaling height by %s %%. 125 Scaling by %s %%. 126 Rotating X by %s degrees; Rotating Y by %s degrees. 127 Rotating by %s degrees. 128 Clipboard &Name 130 Texture &Name 131 Brush &Name 132 Not all channels exist for combine. 133 Not all channels are the same size for combine. 134 Is it OK to close all the open images so that scanning will go faster? 136 Unsupported 'MGX_IMAGE' clipboard type. 137 Do you want to convert the open image to the same format as the saved image? 138 Please wait... 139 Your scanner driver cannot be opened. Make sure you have selected a valid scanner driver from the Setup Scanner dialog box and have included any necessary DOS drivers in your CONFIG.SYS startup file. 140 Your grabber driver cannot be opened. Make sure you have selected a valid grabber driver from the Setup Grabber dialog box and have included any necessary DOS drivers in your CONFIG.SYS startup file. 141 New viewing percentage is out of range. 142 Cannot allocate enough memory to load the program. Exiting... 143 Cannot change to directory '%s'. 144 Cannot change the write-protected file '%s'. 145 Images that have different color depths cannot be stitched. 146 Transform 147 &Anchor 148 This file was not installed with iGrafx Image.\n Unable to install now due to unexpected failure.\n Try the iGrafx Image Installer. 149 The %s cannot be used with palette color or line art images. 150 B 151 KB 152 MB 153 GB 154 Are you sure you want to delete \n'%s' (%s)? 155 Error creating temp filer\n Cannot complete operation 156 Please insert disk containing file %s. 157 File %s was found.\nHowever, this is not the disk specified.\nLoad anyway?. 158 Warning: File %s is read only. \n It is not writable. 159 R- 160 G- 161 B- 162 C- 163 M- 164 Y- 165 K- 166 %s x %s %s at (%s,%s) 167 Scratchpad 170 Cannot open the image - %s 171 Cannot complete the operation - %s 172 Cannot access the image data in the cache path 173 Do you want to apply operations to full resolution image '%s' 174 This macro contains low resolution open command(s). Would you like to convert them to normal open commands? 175 The selected object is not in the masked area. 176 Must have a brush to perform this operation. 177 The %s named '%s' refers to a file (%s) that cannot be found.\n\nClick YES if you wish to delete the named entry.\n\nClick NO if you wish to check the location for %s files in the Options dialog box, and try again. 178 Cannot create the file '%s'. 179 Cannot copy '%s' to file '%s'. 180 The location '%s' is READ ONLY. Please specify a location having write-access in the Options dialog box. 181 The path '%s' cannot be found. Check the location in the Options dialog box. 182 This palette cannot be used because it contains more than 256 colors. 184 The %s cannot be used with line art images. 185 Command '%s' failed. Do you want to try to continue? 186 A document with the same filename is already open.\nDo you want to try again? 187 '%s' is linked to the file, '%s', that cannot be opened low resolution. 188 Unknown 189 The location '%s' is READ ONLY. Please rename the style or specify a location having write-access in the Options dialog box. 190 H- 191 S- 192 L- 193 The macro '%s' has been modified, do you want to continue? 194 Batch ImageBrowser 195 Select 196 Do you want to save halftone changes? 197 Do you want to save calibration changes? 198 Partial changes have been made that cannot be undone. Do you still want to cancel? 252 Optimized Preview 253 &Save Ctrl+S 254 &Update client 255 E&xit Alt+F4 256 E&xit to client 257 &Undo 258 &Redo 259 Manual App&ly Ctrl+Shift+A 260 Auto App&ly Ctrl+Shift+A 261 Cre&ate Scratchpad Ctrl+Shift+F10 263 This function is not available when a mask is on the image. 264 Are you sure you want to delete the selected object(s) ? 265 &Group 266 Un&group 267 FastBits... 268 This operation cannot be undone. Do you want to continue? 269 Previous AVI frame 270 Next AVI frame 273 This calibration map is not a measurement map and can only be used with visual calibration 274 Could not find file '%s'. Would you like to try to locate the file? 275 The selected drive does not have the correct volume label '%s' for Photo CD file '%s'. Would you like to try to locate the correct drive? 276 Printing Cyan Separation 277 Printing Magenta Separation 278 Printing Yellow Separation 279 Printing Black Separation 280 Printing Full Color Image 281 Printing Grayscale Image 282 Command '%s' is not currently available. Do you want to try to continue? 283 Error copying file from '%s' to '%s' 286 %s - printing... 287 Print request processing. Do you want to terminate it? 289 RGB HEX 290 Width %d Height %d 291 All Pages 301 Text Tool 302 Clear 303 Cut 304 Text Editing 310 Paint Tool 311 Airbrush Tool 312 Clone Tool 313 Texture Tool 314 Smear Tool 315 Eraser Tool 316 Image Spray Tool 320 Sharpen Tool 321 Smooth Tool 322 Lighten Tool 323 Darken Tool 330 Gradient Fill Tool 331 Texture Fill Tool 332 Color Tint Fill Tool 333 Smart Fill Tool 340 Pencil Tool 341 Shape Draw Tool 342 Freehand Draw Tool 350 Mask Transform Tool 351 Selector Transform Tool 360 Size Image 361 Rotate 90CW 362 Rotate 180 363 Rotate 90CCW 364 Rotate Arbitrary 365 Flip Horizontal 366 Flip Vertical 367 Flip Diagonal 368 Invert 369 Combine All Objects 370 Expand Image 371 Merge Mask 372 Special Filter 373 Paste 374 Feather 375 Crop 376 Color Reduction 377 Convert To 378 Remove Holes 379 Mask Smoother 390 Map Changes 391 Tone Balance 392 Contrast/Brightness 393 Posterize 394 Hue Map 395 Color Balance 396 Apply Calibration Map 397 Edit Palette 398 Hue Shift 399 Threshold 400 Shape Mask 402 FreeHand Mask 403 Paint On Mask 404 Smart Mask 405 Transform Mask 407 Invert Mask 408 Remove Mask 410 Load Mask 411 Stroke Mask 412 Expand Smart Mask 413 Mask From Object 414 Object From Mask 420 Delete Object 421 Duplicate Objects 422 Feather Object 430 Insert 431 Insert 432 Fill 433 Color Change 434 Label 436 Special Effect 437 Object Align 438 Combine Selected Objects 439 Object Position 440 Object Lock 441 Combine Objects Together 442 Object UnLock 443 Group Objects 444 UnGroup Objects 445 Mask Point Editing 446 Similar 469 Rotate Objects 90CW 470 Rotate Objects 180 471 Rotate Objects 90CCW 472 Rotate Objects Arbitrary 473 Hide Object 474 Show Object 475 Move Object 476 Lock Object 477 Unlock Object 478 Edit Object Alpha 479 Crop Object 480 Layer Object 482 Size Objects 483 Grow/Shrink Mask 485 Image Warp 486 Aperture 487 Light Studio 488 Bevel Factory 489 Lens Flare 490 Mask Channel Edit 491 Send To Mask Channel 498 Ctrl+Z 499 Ctrl+Y 500 Ctrl+Shift+Z 501 Ctrl+Alt+Z 510 %s printed on %s 511 Print Style '%s' 512 Print Device '%s %s' 513 No ink correction 514 Ink correction: Recipe for Red is %d%% Magenta plus %d%% Yellow 515 Ink correction: Recipe for Green is %d%% Yellow plus %d%% Cyan 516 Ink correction: Recipe for Blue is %d%% Cyan plus %d%% Magenta 517 No halftoning info sent 518 Halftone frequency C %s M %s Y %s K %s lines/inch 519 Halftone angle C %s° M %s° Y %s° K %s° 520 Halftone frequency %s lines/inch - angle %s° 521 Halftone dot is %s - Minimum dot %d%% - Maximum dot %d%% 522 No black generation or UCR 523 Black generation amount '%s' 524 Black generated from %d%% UCR and %d%% additive boost 525 No device/dot gain correction 526 Device/dot gain correction '%s' 527 Cyan 528 Magenta 529 Yellow 530 Black 540 Yes 541 No 542 %d pixels (%s %s) 543 %ldKB 544 Image is %d%% in memory 545 Undo is %d%% in memory 546 %ldKB Disk 547 %ldKB 548 Mask is %d%% in memory 549 Mask Undo is %d%% in memory 550 Unable to logon successfully to the mail system. 551 iGrafx Image 560 Color Management is disabled. Use the Options dialog to enable Color Management. 561 Dialog already in use by another instance of iGrafx Image. 600 inches 601 mm 602 picas 603 cm 604 pixels 700 Are you sure you want to delete the thumbnails for directory '%s' on volume '%s'? 701 Do you want to keep thumbnails for directory '%s' on removable volume '%s'? 702 Cannot read. 703 Error copying file\nfrom '%s'\nto '%s'\n\nContinue? 704 Error renaming file\nfrom '%s'\nto '%s'\n\nContinue? 705 Error deleting file\n'%s'\n\nContinue? 706 Are you sure you want to delete the thumbnails listed for directory '%s'? 707 Error creating thumbnail file '%s'. 708 Error reading from thumbnail file '%s'. 709 Error writing to thumbnail file '%s'. 710 Images in directory '%s' have Photo CD thumbnails. Are you sure you want to create new thumbnails in directory '%s'? 711 Are you sure you want to delete file(s) '%s'? 712 Invalid file specification: '%s'. 713 No files matching file specification: '%s'. 714 Image file not resident. In order to install '%s', please insert %s%s, or enter its path. You can also use the Installer to install the image. 716 Unable to find the brush named '%s'. It may be installed incorrectly. 717 Cannot open file '%s' to create brush. 720 Cannot clone between images of different types. 721 In category '%s', overwrite existing brush named '%s'? 722 '%s' 723 iGrafx Image Supplemental Disk 724 Image file not resident. In order to install '%s', please insert %s%s, or enter its path. You can also use the Installer to install the image. 725 iGrafx Image Disk 726 In category '%s', delete the brush named '%s'? 727 In category '%s', rename existing brush named '%s' to '%s'? 728 In category '%s', create brush named '%s'? 729 Since you changed Brush method, you also have to change brush name or category name. 732 Add 733 &Add 736 (None) 740 (Normal) 741 Additive 742 Subtractive 743 If Lighter 744 If Darker 745 Color 746 Hue 747 Saturation 748 Luminance 749 Red 750 Green 751 Blue 752 Cyan 753 Magenta 754 Yellow 755 Black 756 Filter 757 Multiply 758 Difference 759 Texturize 760 Invert 761 Overlay 762 Screen 763 HardLight 764 ColorDodge 765 ColorBurn 766 SoftLight 767 Dissolve 770 This function is not currently implemented. 771 (%d%s gray) 772 (%d, %d, %d%s RGB) 773 (%d °, %d%%, %d%% HSL) 774 (%d, %d, %d, %d%s CMYK) 775 % 776 Low Resolution only supports TIFF, PP4, PP5, and PPF images. 777 FastBits only supports uncompressed TIF's without mask channels. 778 QuickZoom 780 This brush is a read only; change the name to save a new brush. 781 This brush cannot be deleted. 782 ImageBrowser 783 Select 784 Unable to use AVI. Be sure AVI version 1.1 is installed. 785 This map was not saved from tone balance.\nSome map data may be lost. 786 '%s' is a TIFF image with extra samples; cannot be opened. 788 Image Spray 789 Delete custom spray ? 790 Custom 791 Image spray file invalid. 792 Image spray exists. 793 Delete custom gradient ? 800 { 801 } 802 pop 803 ifelse 804 bind def 805 end 806 40 dict begin \n/mysave save def \n/noimage { {pop 1} settransfer image } def \n/colorext systemdict /colorimage known def 807 /readdata { currentfile exch readhexstring pop } bind def 808 /readdata { currentfile exch readstring pop } bind def 809 /myspotfunc { abs exch abs 2 copy 3 mul exch 4 mul add 3 sub dup 0 lt \n{ pop dup mul exch .75 div dup mul add 4 div 1 exch sub } \n{ dup 1 gt {pop 1 exch sub dup mul exch 1 exch sub .75 div dup mul add 4 div 1 sub } 810 { .5 exch sub exch pop exch pop } ifelse } ifelse } bind def 811 /myspotfunc { abs exch abs 2 copy gt {pop} {exch pop} ifelse 1 exch sub } bind def 812 /myspotfunc { abs exch abs 2 copy add 1 gt \n{ 1 sub dup mul exch 1 sub dup mul add 1 sub } \n{ dup mul exch dup mul add 1 exch sub } \nifelse } bind def 813 /myspotfunc {2 exch sub exch abs 2 mul sub 3 div } bind def 814 /myspotfunc { /y exch def /x exch def \n/ang y x .001 add atan cvi def \nang 72 mod 72 sub abs 72 div \ny y mul x x mul add 1 exch sub \nadd 2 div } bind def 815 %s %s /myspotfunc load setscreen 816 colorext 817 %s %s /myspotfunc load 818 setcolorscreen 819 /doinvert true def 820 /doinvert colorext not def 821 /doinvert false def 822 doinvert { {1 exch sub} settransfer }{ {} settransfer } ifelse 823 %s %s translate 824 %s %s scale 825 /pps1 %d string def 826 /pps2 %d string def 827 /pps3 %d string def 828 /pps4 %d string def 829 /pps5 %d string def 830 /docolorsep colorext def 831 /docolorsep false def 832 /doimage 833 doimage 834 docolorsep 835 {pps1 readdata} {pps2} {pps2} {pps2} 836 {pps2} {pps1 readdata} {pps2} {pps2} 837 {pps2} {pps2} {pps1 readdata} {pps2} 838 {pps2} {pps2} {pps2} {pps1 readdata} 839 true 3 colorimage 840 true 4 colorimage 841 {pps1 readdata} 842 {pps2 readdata} 843 {pps3 readdata} 844 {pps4 readdata} 845 {pps5 readdata} 846 pps1 readdata pop 847 pps2 readdata pop 848 pps3 readdata pop 849 pps4 readdata pop 850 pps5 readdata pop 851 image 852 noimage 853 %d %d %d [%d 0 0 %d 0 %d] 854 %%%%BeginBinary: %ld 855 \n%%%%EndBinary 856 \nmysave restore 857 \n 860 %%!PS-Adobe-2.0 EPSF-1.2 861 %%%%BoundingBox: 0.0 0.0 %s %s 862 %%%%Creator: Micrografx %s 863 %%%%Title:%s 864 %%%%Creation Date: %s 865 %%%%SuppressDotGainCompensation 866 %%%%DocumentProcessColors: Cyan Magenta Yellow Black 867 %%%%CyanPlate: %s 868 %%%%MagentaPlate: %s 869 %%%%YellowPlate: %s 870 %%%%BlackPlate: %s 871 %%%%EndComments 872 40 dict begin gsave 873 /pps %d string def /doimage {{pps readdata} image} def 874 /_currentgray systemdict /currentgray get def /_currentgray systemdict /currentgray get def /colorext systemdict /colorimage known def 875 /foureq { 4 index eq 8 1 roll 4 index eq 8 1 roll 4 index eq 8 1 roll 4 index eq 8 1 roll pop pop pop pop and and and} def 876 colorext {/plane 0 def} {/plane 5 def} ifelse /setcmykcolor where {pop 1 0 0 0 setcmykcolor _currentgray 1 exch sub 0 1 0 0 setcmykcolor _currentgray 1 exch sub 0 0 1 0 setcmykcolor _currentgray 1 exch sub 877 0 0 0 1 setcmykcolor _currentgray 1 exch sub 4 {4 copy} repeat 1 0 0 0 foureq {/plane 1 store} if 0 1 0 0 foureq {/plane 2 store} if 0 0 1 0 foureq {/plane 3 store} if 0 0 0 1 foureq {/plane 4 store} if 878 0 0 0 0 foureq {/plane 6 store} if} if /noimage {pop 1} def 879 plane 0 eq {{{pps1 readdata} {pps2 readdata} {pps3 readdata} {pps4 readdata pps5 readdata pop} true 4 colorimage}} if 880 plane 1 eq {{{pps1 readdata pps2 readdata pop pps3 readdata pop pps4 readdata pop pps5 readdata pop} image}} if 881 plane 2 eq {{{pps1 readdata pop pps2 readdata pps3 readdata pop pps4 readdata pop pps5 readdata pop} image}} if 882 plane 3 eq {{{pps1 readdata pop pps2 readdata pop pps3 readdata pps4 readdata pop pps5 readdata pop} image}} if 883 plane 4 eq {{{pps1 readdata pop pps2 readdata pop pps3 readdata pop pps4 readdata pps5 readdata pop} image}} if 884 plane 5 eq {{{pps1 readdata pop pps2 readdata pop pps3 readdata pop pps4 readdata pop pps5 readdata} image}} if 885 plane 6 eq {{{pps1 readdata pop pps2 readdata pop pps3 readdata pop pps4 readdata pop pps5 readdata} noimage}} if 886 plane 0 eq {{{pps1 readdata} {pps2 readdata} {pps3 readdata pps4 readdata pop} true 3 colorimage}} if 887 plane 4 eq plane 5 eq or {{{pps1 readdata pop pps2 readdata pop pps3 readdata pop pps4 readdata} image}} if 888 plane 4 eq plane 5 eq plane 0 eq or or not {{{pps1 readdata pop pps2 readdata pop pps3 readdata pop pps4 readdata} noimage}} if 889 grestore end 890 %d %d %d [%d 0 0 -%d 0 %d] 891 No Color Manager is selected. You must use Setup Color Manager under the File menu before performing this function. 892 Could not open the Color Manager. Please verify that you have selected the proper color management system before continuing. 893 Could not read information from the Color Manager. 900 %!PS-Adobe-2.0 EPSF-1.2\n%%Creator:Adobe Illustrator (TM) Micrografx, Inc.\n 901 %%%%BoundingBox:%s %s %s %s\n 902 %%EndComments\n%%EndProlog\n 903 %%BeginSetup\n%%EndSetup\n 904 u\n1.00 1.00 1.00 0.00 k\n1.00 1.00 1.00 0.00 K\n1 j\n1 J\n0.00 w\n10 M\n 905 U\n 906 %%Trailer\n 907 newpath 908 %s %s moveto 909 %s %s lineto 910 clip 911 %s %s scale 912 %s %s %s %s %s %s curveto 1001 .* 1002 *.tif,*.bmp,*.tga... 1003 .ppf 1004 .pp5 1005 .tif 1006 .ai 1007 .psd 1008 .gif 1009 .png 1010 .cgm 1011 .cdr 1012 .cmx 1013 .dcs 1014 .eps 1015 .jpg 1016 .pcd 1017 .pct 1021 .drw 1023 .pp4 1024 .avi 1025 .pcx 1028 .sct 1029 .ras 1030 .tif 1031 .tga 1032 .bmp 1033 .dib 1034 .wmf 1035 .fpx 1037 .jpeg 1300 TWAIN.DLL 1302 Could not find the TWAIN Source Manager (TWAIN.DLL). Please copy the TWAIN Source Manager from your Program Disk to your Windows directory. 1303 No TWAIN Source found in the TWAIN directory. Refer to your TWAIN Source installation instructions. 1304 Not enough memory to acquire. 1305 TWAIN Source %s is already in use. 1306 An undetermined TWAIN error has occurred. Please verify that the TWAIN subdirectory exists under your WINDOWS directory. 1307 TWAIN capability error has occurred. 1308 TWAIN protocol error has occurred. 1309 TWAIN bad value error. 1311 TWAIN DG DAT MSG is out of expected sequence. 1312 TWAIN detailed error status returns success. 1313 TWAIN could not get detailed Error Code. 1314 TWAIN Unknown error code returned by DG_CONTROL, DAT_STATUS, MSG_GET. 1315 The TWAIN Source does not support memory transfers. 1316 The TWAIN Source has issued an invalid Pixel Type. 1317 The TWAIN Source has issued an unsupported Pixel Type/Depth combination. 1318 iGrafx Image - TWAIN ERROR 1319 The TWAIN Source sent a failure message. 1320 The TWAIN Source capabilities could not be read. 1321 The TWAIN Source capabilities could not be set. 1401 DEFAULT 1402 SOURCE_COLOR 1403 ACTIVE_COLOR 1404 ALTERNATE_COLOR 1405 DEST_DATA 1406 CURRENT_IMAGE 1407 CURRENT_UNDO 1408 SOURCE_DATA 1409 CURRENT_DEST 1410 FLIP_MODE 1411 FLIP_NONE 1412 FLIP_MIRROR_HORIZONTAL 1413 FLIP_MIRROR_VERTICAL 1414 FLIP_MIRROR_BOTH 1415 FLIP_TILE 1416 FLIP_TILE_HORIZONTAL 1417 FLIP_TILE_VERTICAL 1418 FLIP_TILE_BOTH 1419 SOURCE_FUNCTION 1420 SOLID_COLOR 1421 COPY_IMAGE 1422 SHARPEN_IMAGE 1423 SMOOTH_IMAGE 1424 LIGHTEN_IMAGE 1425 DARKEN_IMAGE 1426 SMEAR_IMAGE 1427 STROKE_METHOD 1428 UNCONNECTED 1429 STYLE 1430 SCATTERED 1431 SIZE 1432 SHAPE 1433 CIRCLE 1434 SQUARE 1435 VERTICAL 1436 HORIZONTAL 1437 SLASH 1438 BACKSLASH 1439 PRESSURE 1440 WEIGHT 1441 EDGE_TYPE 1442 AIRBRUSH 1443 FEATHER 1444 FADE 1445 TRANSPARENCY 1446 OPACITY_SCALE 1447 TILT 1448 TIMER 1449 MAX_FLOW_RATE 1450 SENSITIVITY 1451 MAX_FLOW_CHANGE 1452 SURFACE 1453 SURFACE_FLIP_MODE 1454 MERGE_MODE 1455 ADDITIVE 1456 SUBTRACTIVE 1457 IFLIGHTER 1458 IFDARKER 1459 COLOR 1460 HUE 1461 SATURATION 1462 LUMINANCE 1463 RED 1464 GREEN 1465 BLUE 1466 CYAN 1467 MAGENTA 1468 YELLOW 1469 BLACK 1470 FILTER 1471 MULTIPLY 1472 DIFFERENCE 1473 TEXTURIZE 1474 STYLE_PRESSURE 1475 CONNECTED 1476 SOLID 1477 PAINT 1478 BRUSH STYLE 1479 SPACING 1480 SMOOTHNESS 1481 OVERLAP 1482 ON 1483 PROTECTION 1484 READ_ONLY 1485 NO_DELETE 1486 IMAGE_SPRAY 1487 TEXTURE_SCALE 1488 OVERLAY 1489 SCREEN 1490 INVERT 1491 HARDLIGHT 1492 COLORDODGE 1493 COLORBURN 1494 SOFTLIGHT 1495 DISSOLVE 1496 HISTORY_UNDO 1600 Selected image mode not supported. 1601 WINTAB Tablet driver not found. 1705 processing... 1706 Command List canceled. 1707 Font '%s' cannot be found. 1708 Cannot open this format low-res. 1709 Unsupported Data Type: %d. 1710 Unsupported Interleave: %02x. 1711 Cannot find object for clone source. 1712 Invalid macro for batch processing - contains image load commands. 1713 No image to work on. 1714 Error processing command '%s'. 1715 Invalid opcode for data. 1716 Error - File signature mismatch. 1717 File contains no image data and no command list. 1718 Photo CD Toolkit error. 1719 Cannot write chunks to compressed files. 1720 Error - Command '%d' out of range. 1721 Error - invalid command type. 1722 Resource missing!!! 1723 This command only works on palette color images. 1724 Photo CD images will be saved as PP5. 1725 Error - The Windows clipboard is empty. 1726 This Effect can not be applied to palette color images. 1727 Unsupported version. 1728 Unknown encoding. 1729 Unsupported number of bits per pixel. 1730 Reserved byte not zero. 1731 Bytes per line not even. 1732 More than 256 color images not supported. 1733 Unknown manufacturer. 1734 Thread is busy. 1735 Not able to setup threading. 1736 dwWaitResult = %ld 1737 This setting only applies to PostScript devices. 1738 Using printer screening with PostScript devices may result in very large files. Are you sure you want to use it? 1739 You must save your mask when you save a command list. 1740 Edits have been made to this image. A link must be maintained with the original image. 1741 Unable to create intermediate file. 1742 This operation will cause the Command List to be discarded. Do you wish to continue? 1743 This operation will cause the FastBits Preview and Command List to be discarded. Do you wish to continue? 1744 The file you are attempting to add does not contain objects. 1754 Drop Shadow~Click to apply a drop shadow to the currently selected object(s). 1755 Wizard Browser~Click to view the iGrafx Image Wizards. 1756 FastBits can only be used on uncompressed TIF's without mask channels. 1757 Object Properties~Click to view the Object Properties window. 1758 Duplicate~Click to make a duplicate of the current selection. 1759 Click to create a new web style. 1760 Channel Mixer~Click to blend color channels together and output to one or all channels. 1790 This Effect can not be applied to line art images. 1791 This Effect changes the image type.\nIt can not be applied to an image with object. 1792 This Effect changes the image type.\nIt can not be applied to the Mask Channel. 1800 Stop On Command Type 1801 Stop on Area 1802 Stop on Command Type and Area 1803 Modified on %s 1804 Modified by %s 1805 Modified by %s on %s 1806 Stop On Every "%s" Command. 1807 Stop When Location {%d,%d,%d,%d} Changes. 1808 Stop On Every "%s" Command that Changes Location {%d,%d,%d,%d} 1809 Stopped On a "%s" Command. 1810 Stopped, Location {%d,%d,%d,%d} has Changed. 1811 Stopped On a "%s" Command that Changed Location {%d,%d,%d,%d}. 1812 Stopped, User Request. 1813 Stopped, Stop Point. 1814 Ready. 1815 Running, Please Wait. 1816 X:%-5s Y:%-5s 1817 W:%-5s H:%-5s 1818 V: (%s) 1819 RGB: (%s,%s,%s) 1820 CMYK: (%s,%s,%s,%s) 1821 Click right mouse button simultaneously with left button to move area. 1900 iGrafx Image (*.ppf) 1901 Micrografx Picture Publisher Image 5.0 (*.pp5) 1902 Tagged Image File Format (*.tif) 1903 Adobe Illustrator (*.ai) 1904 Adobe Photoshop (*.psd) 1905 CompuServe Bitmap (*.gif) 1906 CompuServe PNG (*.png) 1907 Computer Graphics Metafile (*.cgm) 1908 CorelDRAW! 3.0 4.0 5.0 (*.cdr) 1909 CorelDRAW! ClipArt (*.cmx) 1910 Desktop Color Separations (*.dcs) 1911 Encapsulated PostScript (*.eps) 1912 JPEG File Interchange (*.jpg) 1913 Kodak Photo CD (*.pcd) 1914 Macintosh PICT (*.pct) 1915 Micrografx Designer 4.x (*.ds4) 1916 Micrografx Designer File (*.dsf) 1917 Micrografx Designer Clipart (*.mgx) 1918 Micrografx Drawing (*.drw) 1919 Micrografx Simply 3D (*.s3d) 1920 Micrografx Picture Publisher Image 4.0 (*.pp4) 1921 Microsoft Video (*.avi) 1922 PC PaintBrush (*.pcx) 1923 PostScript (*.prn) 1924 PostScript (*.ps) 1925 Scitex CT (*.sct) 1926 Sun Raster (*.ras) 1927 Tagged Image File CCITT (*.tif) 1928 Targa Bitmap (*.tga) 1929 Windows Bitmap (*.bmp) 1930 Windows DIB (*.dib) 1931 Windows Metafile (*.wmf) 1932 FPX Image (*.fpx) 1933 IFF (*.iff) 1934 JPEG File Interchange (*.jpeg) 1950 *.ppf 1951 *.pp5 1952 *.tif 1953 *.ai 1954 *.psd 1955 *.gif 1956 *.png 1957 *.cgm 1958 *.cdr 1959 *.cmx 1960 *.dcs 1961 *.eps 1962 *.jpg 1963 *.pcd 1964 *.pct 1965 *.ds4 1966 *.dsf 1967 *.mgx 1968 *.drw 1969 *.s3d 1970 *.pp4 1971 *.avi 1972 *.pcx 1973 *.prn 1974 *.ps 1975 *.sct 1976 *.ras 1977 *.tif 1978 *.tga 1979 *.bmp 1980 *.dib 1981 *.wmf 1982 *.fpx 1983 *.iff 1984 *.jpeg 1991 Brush Files (*.mbs)|*.mbs|| 1992 CompuServe Bitmap (*.gif)|*.gif|JPEG File Interchange (*.jpg)|*.jpg|JPEG File Interchange (*.jpeg)|*.jpeg|Compuserve PNG (*.png)|*.png|Windows Bitmap (*.bmp)|*.bmp|| 2000 *.map 2001 *.sty 2002 *.htn 2003 *.map 2004 *.sep 2005 *.map 2006 *.dfx 2007 *.d?? 2008 *.d?? 2009 *.ai 2010 *.tif 2011 *.ppf 2012 *.tif 2013 *.tif 2014 *.map 2015 *.pl3 2016 *.mgr 2017 *.ppf 2020 *.mbs 2021 *.mbs 2022 *.mbs 2023 *.mbs 2024 *.mbs 2025 *.mbs 2030 *.mbs 2031 *.mbs 2032 *.mbs 2033 *.mbs 2050 *.mbs 2051 *.mbs 2052 *.mbs 2055 *.mbs 2077 *.tif 2078 *.exp 2079 *.clm 2080 *.txt 2201 Creating Text 2202 Clearing 2203 Cutting 2204 Editing Text 2205 Creating New Image 2210 Paint Brush 2211 Airbrush 2212 Clone Brush 2213 Texture Brush 2214 Smear Brush 2215 Eraser Brush 2216 Image Spray 2220 Sharpen Brush 2221 Smooth Brush 2222 Lighten Brush 2223 Darken Brush 2230 Gradient Filling 2231 Texture Filling 2232 Tint Filling 2233 Smart Filling 2240 Drawing With Pencil 2241 Drawing Shape 2242 Drawing Freehand Shape 2250 Transforming 2251 Transforming 2260 Sizing Image 2261 Rotating Image 90CW 2262 Rotating Image 180 2263 Rotating Image 90CCW 2264 Rotating Image Arbitrary 2265 Flipping Image Horizontally 2266 Flipping Image Vertically 2267 Flipping Image Diagonally 2268 Inverting Image 2269 Combining All Objects 2270 Expanding Image 2271 Merging Mask 2273 Pasting 2274 Feathering Mask 2275 Cropping Image 2276 Reducing Colors 2277 Converting Image 2278 Remove Holes 2279 Smoothing Mask 2290 Applying Map 2291 Applying Tone Balance 2292 Applying Contrast/Brightness 2293 Applying Posterize 2294 Applying Hue Map 2295 Applying Color Balance 2296 Applying Calibration Map 2297 Applying Palette Edit 2298 Applying Hue Shift 2299 Applying Threshold 2300 Creating Shape Mask 2302 Creating Freehand Mask 2303 Creating Paint On Mask 2304 Smart Masking 2305 Transforming Mask 2307 Inverting Mask 2308 Removing Mask 2310 Loading Mask 2311 Stroking Mask 2312 Expanding Smart Mask 2313 Creating Mask from Object 2314 Creating Object From Mask 2320 Deleting Objects 2321 Duplicating Objects 2322 Feathering Object 2336 Applying Special Effect 2337 Aligning Objects 2338 Combining Selected Objects 2339 Positioning Objects 2340 Locking Objects 2341 Combining Objects Together 2342 UnLocking Object 2343 Grouping Objects 2344 UnGrouping Objects 2345 Point Editing Mask 2346 Masking Similar Color Areas 2347 Processing 2348 Processing 2349 Loading 2350 Saving 2351 Loading Low Resolution 2358 Copying to file 2365 Saving mask 2366 Loading fastbits 2368 Rebuilding image 2373 Hiding Objects 2374 Showing Objects 2375 Moving Objects 2376 Locking Objects 2377 Unlocking Objects 2378 Editing Object Alpha 2379 Cropping Object 2380 Layering Object 2382 Sizing Objects 2383 Growing/Shrinking Mask 2401 You have selected a Precision Transform that does not match the printer type. 2403 You have selected a Source Precision Transform and no Destination Precision Transform and there is no Monitor Precision Transform to use as the Destination default. 2404 You have selected a CMYK Icc Profile that does not match the RGB file selected. Change your file open profile to match your open file type. 2405 You have selected an RGB Icc Profile that does not match the CMYK file selected. Change your file open profile to match your open file type. 2407 You have selected a Print Style that contains a Kodak Precicion Transform and Color Management is not enabled. 2408 You have selected a Precision Transform that does not match the file type selected. 2410 Error retrieving Precision Transform. The operation will continue without writing a Precision Transform. 2411 Warning : You have selected writing Precision Transforms with files and selected a file format that is incompatible with the Precision Transform associated with this image. Function will continue using Precision Transform file type. 2416 Warning : You have selected a Precision Transform that does not match the file type selected. Select a Precision Transform that matches the current file type. 2418 Cannot open multiple files with color management. 2500 Picture has to be between 1 and 32K lines wide. 2501 Picture has to be between 1 and 32K lines long. 2502 Error opening an image with more than 16384 lines. 2503 Cannot allocate enough memory to complete the operation. 2504 Not enough memory for image data. 2505 not enough disk space for cache file in cache directory '%s'. Your disk has only %ld bytes of unused space. Free up some space on the disk or change your option for the image cache location to a larger disk. 2506 Cannot create cache file in cache directory '%s'. 2507 Write failed on cache file in directory '%s'. 2508 Error writing to file '%s'. 2509 Error reading from file '%s'. 2510 Not enough memory. 2511 Read failed on cache file in directory '%s'. 2512 Mask too complex.\nOperation will be partially completed. 2513 The system resources are very low. Please save your work, close some applications, and restart iGrafx Image. 2514 This file type is not supported on open. 2516 You have %d day before your trial version will expire. 2517 You have %d days before your trial version will expire. 2520 Monitor Setup 2521 Setup Print Style - 2522 Options 2523 Image Properties 2551 (Normal) 2552 FastBits 2553 Low Resolution 2554 All Files 2555 All Supported Files 2556 &Mode 2557 Th&umbnails... 2558 &CMS... 2559 &Options... 2560 Use the Thumbnail viewer to open Multiple files from removable media. 2561 All Supported Bitmap Files 2570 Share Violation. File already open on another computer. 2700 File name '%s' \nis too long.\nWill truncate to '%s'. 2702 Enter Album Name 2703 No Selected Album. 2704 Album '%s' already exists. 2705 Not a valid file name. 2706 Choose one file for save. 2707 Not a valid album name 2708 There is more than one file by \nthat name in the album. 2709 sure you want to delete\nalbum '%s'? 2710 Rename album '%s'\n to \n. 2711 Ok to rename album '%s'\n to '%s'? 2712 View &Directories 2713 View &Albums 2714 &View Thumbnails 2715 &View File Names 2716 Error: Unable To Complete Operation. 2717 Error deleting thumbnail file. 2718 Error renaming thumbnail file.\n Thumb may have been lost. 2719 Error copying thumbnail file. 2720 Ok to rename file '%s'\n to '%s'? 2721 Rename file '%s'\n to file: 2722 Copy File:\n '%s'\n to new file: 2723 Copy File(s):\n '%s'\n to directory: 2724 '%s' is an invalid directory. 2725 Ok to copy file:\n %s\n to:\n %s? 2726 Error: Destination file exists or is unwriteable. 2727 Description has not been saved.\n Ok to save it now? 2728 Move File:\n '%s'\n to new file: 2729 Move File(s):\n '%s'\n to directory: 2730 Ok to move file:\n '%s'\n to:\n '%s' 2731 Error moving thumbnail for\nfile '%s'. 2732 Error moving file from \n '%s'\nto\n '%s'.\n\nContinue? 2733 Enter New Directory Path and Name: 2734 Ok to create new directory '%s' 2735 Error creating directory '%s'. 2736 Rename Directory:\n %s\n to Directory: 2737 Ok to rename Directory '%s'\nto '%s'. 2738 Error renaming Directory from '%s'\nto '%s'. 2739 Are you sure you want to delete\ndirectory '%s'? 2740 Error deleting directory '%s'. 2741 Error in thumbnail data base.\n Thumbnails or album entries may have been lost 2742 Error adding file to search results.\n Results may not contain matching file '%s'. 2743 Error creating results album.\n Results may be missing or inaccurate. 2747 &Search 2748 &Stop 2749 Type Keyword Here 2750 %ld pixels (%s %s) 2751 Database found in the directory '%s'.\n Ok to delete it?\n 2752 There is already a database for the\n directory '%s'.\n Ok to overwrite it?\n 2756 '%s' does not exist. 2757 Directories Searched 2758 Files Searched 2759 Search Successful.\nView Results? 2760 No Matches Found. 2761 %ld pixels/inch 2780 .ALL 2781 .ALL 2782 File '%s' is Read Only. 2783 Thumbnails found in the directory '%s'.\n Ok to delete them?\n 2784 Error copying %s.\nCannot copy file to itself.\n Continue? 2785 Error renaming '%s'.\nCannot rename file to itself. 2786 Ok to delete thumbnails for selected files? 2787 Error moving %s.\nCannot move file to itself.\n Continue? 2788 Destination file %s exists.\n Ok to overwrite? 2789 Error deleting file '%s' 2790 '%s' is not a valid file name. 2791 There are no albums to import at\n '%s' 2792 &CMS 2793 &Options 2794 Error deleting file '%s'. 2795 Can not move files across drives.\n Use Copy. 2796 .ALL 2797 .ALL 2798 The filename is too long. Please correct and retry. 2799 Name 2800 %s = {top=%s left=%s width=%s height=%s} 2801 Please enter a valid background filename. 2802 Please enter a valid foreground filename. 2803 Open Image 2804 Save Image As 2805 Name 2806 Description 2807 Type 2808 Copyright 2809 Version 2810 Wizards 2811 Tutorials 2812 Wizards 2813 OK 2814 Web Pattern View of: 2815 This is %s %d-Point text. 2816 Red 2817 Green 2818 Blue 2819 White 2820 Black 2821 Magenta 2822 Cyan 2823 Yellow 2824 No Active Image to View 2825 Overlay 2826 Save Options not required for this file type. 2827 Thank you. To configure your scanner in the future, simply access scanner setup located in the menu under the file menu. 2828 An image is required. Do you want to open one now? 2829 You have loaded an image spray with more than 32 objects. Only the first 32 objects will be visible. 2830 The file you are attempting to add is open. Close the file and try again. 2831 Unable to save CMYK images as TGA files. Please convert the image to another type and retry. 2832 Copyright (c) 1996 Micrografx, Inc. All Rights Reserved. 2833 8.0 2834 PP Wizard 2836 Image Spray content files can not be opened. Revert to the original file to make changes to content. 2837 The file you are attempting to open has been saved with a version that is newer than iGrafx Image 1.0 and cannot be read. 2838 TIF's with Mask Channels or Compression are not supported with FastBits. 2839 Commands 2840 This filter requires a selection. 2841 Name 2842 Value 2843 The Undo command on the Edit menu is not available for wizards and macros. To undo a wizard or macro, click No, save your file, and then run the wizard or macro. Otherwise, click Yes to continue. 2844 New 2845 New Property 2846 Default 2847 Web Styles Page 2848 No URL defined. Use Object Properties to add one. 2849 Wizards cannot be run while recording a macro. 3001 Click to move the view, or press and drag to magnify a new area. 3010 Press and drag to move the toolbox. 3030 Set options for the Paint On Mask tool. 3031 Set options for the Freehand Mask tool. 3032 Set options for the Shape Mask tool. 3033 Set options for the Smart Mask tool. 3035 Set options for the Mask Transform tool. 3036 Set options for the Mask Point Editing tool. 3037 Set options for the Crop tool. 3038 Set options for the Path Editing tool. 3050 Set options for the Paint tool. 3051 Set options for the Airbrush tool. 3052 Set options for the Clone tool. 3053 Set options for the Texture tool. 3054 Set options for the Smear tool. 3055 Set options for the Eraser tool. 3093 Dialog box to create a new image file. 3108 Contains all colors of the current image. 3109 Contains all transparent colors of the current image. 3110 Use the magic wand or the color probe to pick specific colors for transparency in this area. 3112 Previews the transparent colors of the image. 3113 Click to convert the current image to specific palette. 3114 Fit in Window~Click to fit the whole image in the image window. 3115 Full Screen Preview~Click to view the image with the current transparency in Full Screen View. 3116 Color Range Wand~Click to select a range of transparent colors from the image. 3117 Click to change the background preview color. 3118 Click to add the current color from the image palette to the transparent palette. 3119 Click to remove the current color from the image palette to the transparent palette. 3132 Click to select the options for viewing the image. 3180 Lists the guidelines that will be created. 3181 Add the current settings to make the guidelines. 3182 Replaces the current guidelines with the current settings. 3183 Deletes the currently selected guideline. 3184 Clears all guidelines. 3185 Position to add the single guideline. 3187 Starting position of the multiple guidelines. 3188 Ending position of the last guideline in the list. 3189 Amount of increment between the multiple guidelines. 3190 Click to show/hide guidelines. 3191 Click to snap/unsnap guidelines. 3192 Click to lock guidelines from being moved. 3193 Click to create horizontal guidelines. 3194 Click to create vertical guidelines. 3195 Click to create a single guideline. 3197 Click to create multiple guidelines. 3234 Default browser not found. 3267 OK 3268 Cancel 3269 Recommended for use with Windows 95 or Windows NT 4.0 or higher. 3270 You saved to a different file. Do you want to open the new file? 3271 iGrafx Image Albums 3273 ° 3290 Show Visual Toolbar 3291 Hide Visual Toolbar 3338 Dialog box to select or protect by color ranges. 3451 Set options for the Sharpen tool. 3452 Set options for the Smooth tool. 3453 Set options for the Lighten tool. 3454 Set options for the Darken tool. 3455 Dialog box to set options for the Stitch tool. 3500 Set options for the Gradient Fill tool. 3501 Set options for the Smart Fill tool. 3502 Set options for the Texture Fill tool. 3503 Set options for the Color Tint Fill tool. 3600 Set options for the Pencil tool. 3601 Set options for the Shape Draw tool. 3602 Set options for the Freehand Draw tool. 3802 Set options for the Text tool. 3803 Set options for the Color Probe tool. 3804 Set options for the Transforming an object. 3805 Set options for the Selector tool. 3807 Set options for the warp tool. 3894 Dialog to view histogram of the image data. 3895 Dialog box to set options for the ClipboardBrowser. 3897 Dialog box to shift hue, color saturation, and lightness. 3898 Dialog box to set the options for the Tone Balance dialog. 3899 Dialog box to set options for the mapping dialog. 3900 Dialog box to set options for selecting a color. 3902 Dialog box to select colors and edit colors. 3904 Dialog box to locate and select an image file to open. 3905 Dialog box to select a location and name to save the image. 3906 Click Cancel to stop printing. 3910 Dialog box to select a scanner driver and its address. 3911 Dialog box to edit calibration maps for scans. 3912 Dialog box to make preferences the new default. 3914 Dialog box to open and edit a portion of a large file. 3915 Dialog box to adjust the points or values on the color map. 3917 Dialog box to reduce the levels of the color map. 3918 Dialog box to adjust hue ranges, color saturation, and lightness. 3919 Dialog box to stretch the tonal range between highlights and shadows. 3920 Dialog box to select a mask file to load. 3921 Dialog box to enter a new mask filename for saving. 3922 Dialog box to set options for resizing an image. 3923 Dialog box to rotate the full image by any angle or direction. 3924 Click the icon for additional information. 3925 Thanks for following your license agreement. 3927 Dialog box to select the file type and filename to create. 3928 Dialog box to select a named clipboard file to paste. 3930 Dialog box to locate and select an image file in thumbnail view to open. 3932 Dialog box to select a map file to be loaded. 3933 Dialog box to create and save a calibration map for scans. 3934 Dialog box to create and save a calibration map for prints. 3935 Dialog box to apply calibration maps to the image. 3936 Dialog box to select a location and name to save the image. 3937 Dialog box to edit calibration maps for prints. 3940 Dialog box to print any size and type of output desired. 3941 Dialog box to select an output device and print style. 3942 Dialog box to set and save options for printing. 3943 Dialog box to threshold the color map. 3946 Dialog box to convert an image to another type. 3950 Dialog box to enter a new filename. 3951 Dialog box to select a macro file to play back. 3952 Dialog box to enter a newly recorded macro filename. 3953 Dialog box to adjust the contrast and brightness. 3954 Dialog box to visually adjust the contrast and brightness. 3955 Dialog box to adjust color balance of an image. 3956 Dialog box to visually adjust color balance of an image. 3959 Dialog box to feather the edges of an object. 3960 Dialog box to expand the image area. 3964 Dialog box to select and apply a special effect. 3965 Dialog box to export the current image. 3966 Dialog box to select a vector shape to load. 3967 Dialog box to enter a new shape filename for saving. 3968 Dialog box to feather the edges of a mask. 3969 Dialog box to set options for smoothing a mask. 3970 Dialog box to confirm whether to apply or undo changes. 3971 Dialog box to select a custom brush name. 3972 Dialog box to summarize useful image information. 3973 Dialog box to set monitor gamma correction. 3974 Dialog box to select a palette to load. 3975 Dialog box to name and save a palette. 3976 Dialog box to enter the name of the new palette. 3977 Dialog box to create a new palette. 3978 Dialog box to select a palette to be merged into the current palette. 3979 Dialog box to create a range of colors. 3980 Dialog box to label a color. 3981 Dialog box to find a color by its full or partial name. 3982 Dialog box to select options for creating DCS files. 3983 Dialog box to modify file locations. 3987 Dialog box to copy a file. 3988 Dialog box to rename a file. 3989 Dialog box to delete a file. 3991 Dialog box to configure how palette colors are arranged. 3992 Dialog box to set options for saving to the JPEG file format. 3993 Dialog box to set open options for Photo CD images. 4000 Dialog box to select and set up a color manager. 4010 Dialog box to visually adjust the contrast and brightness. 4011 Dialog box to visually adjust the contrast and brightness. 4012 Dialog box to visually adjust color balance of an image. 4013 Dialog box to visually adjust color balance of an image. 4022 Click to adjust the grid height. 4023 Click to adjust the grid width. 4024 Click to lock the width and height adjustments to the same value. 4025 Click to turn the grid on. 4026 Click to turn on snap to grid. 4053 Select Color Space~Click to select what Color Space the info probe will report in. 4054 Probe Color Swatch~Left Mouse - send to Active Color, Righe Mouse - send to Alternate Color. 4061 Select Probe~Click to make this probe the selected probe. 4063 Select Color Space~Click to select what Color Space this probe will report in. 4064 Activate MultiProbe Tool~Click to activate MultiProbe Tool 4065 MultiProbe Visibility~Click to turn MultiProbes on/off on image. 4085 Select Units~Click to select what units you want the distances to be reported in. 4086 Activate Measure Tool~Click to activate the Measure Tool 4087 Measure Tool Visibility~Click to turn the Measure Tool visibility on or off. 4089 Select Angle Units~Click to select what units you want the angles to be reported in. 4100 Dialog box to set up halftone style. 4101 Dialog box to edit printer calibration settings. 4103 Dialog box to adjust the values that determine the amount of black generated. 4104 Dialog box to set up extra printer settings. 4105 Dialog box to select CMS printer profile. 4106 Dialog box to edit color separation style. 4110 Dialog to create brush styles. 4111 Dialog to create brush styles. 4112 Dialog to create brush styles. 4113 Dialog to create draw styles. 4114 Dialog to create draw styles. 4115 Dialog to create texture brush styles. 4121 Dialog box to set options for aligning objects. 4122 Dialog box to set options for selecting a color. 4123 Dialog to edit the palette of a palette color image. 4126 Dialog box to edit operations in the Command Center. 4127 Dialog box to set position of object(s). 4128 Dialog box to edit a macro file. 4132 Dialog to select images and macros to be batched. 4135 Dialog to select options for batch macro. 4506 Dialob box to modify extension associations. 4507 Dialog box to modify units settings. 4508 Dialog box to modify plug-in settings. 4509 Dialog box to modify scratchpad settings. 4510 Dialog box to modify object settings. 4511 Dialog box to modify undo settings. 4513 Dialog box to modify miscellaneous settings. 4514 Dialog to set up monitor gamma and monitor profile. 4516 Dialog box to select CMS monitor profile. 4521 Dialog box to create and save a calibration map for scans. 4522 Dialog box to create and save a calibration map for prints. 4531 Dialog to package support files for current iGrafx Image file. 4650 Dialog box to create mask by selecting colors from the image. 4700 Dialog to load a custom toolbox. 4703 Dialog to enter a name for custom toolbox. 5050 8-Bit Grayscale 5051 1-Bit Line Art 5052 1-Bit Scattered 5053 4-Bit Palette Color 5054 8-Bit Palette Color 5055 24-Bit RGB Color 5056 32-Bit CMYK Color 5057 16-Bit Grayscale 5058 48-Bit RGB Color 5059 64-Bit CMYK Color 5301 Enter file name. 5302 Click to select files. Press Shift and click for a group. Press Ctrl and click for individual files. 5318 Click to select an album. 5322 Click to select files. Press Shift and click for a group. Press Ctrl and click for individual files. 6001 Select for all files. 6002 Select for all image files. 6003 Select for Picture Publisher 6.0 (PPF) files. 6004 Select for Picture Publisher 5.0 (PP5) files. 6005 Select for Tag Image File Format (TIFF) files. 6006 Select to view all Adobe Illustrator (AI) files. 6007 Select to view all Adobe Photoshop (PSD) files. 6008 Select for CompuServe GIF files. 6009 Select to view all CompuServe PNG (PNG) files. 6010 Select to view all Computer Graphics Metafile (CGM) files. 6011 Select to view all Corel Draw (CDR) files. 6012 Select to view all CorelDraw! Clip Art files. 6013 Select for Desktop Color Separation (DCS) files. 6014 Select for Encapsualted PostScript (EPS) files. 6015 Select for JPEG files. 6016 Select for Photo CD (PCD) files. 6017 Select for Macintos Pict (PCT) files. 6018 Select to view all Micrografx Draw (DRW) files. 6019 Select for Picture Publisher 4.0 (PP4) files. 6020 Select for Audio/Video Interleaf (AVI) files. 6021 Select for PCX files. 6022 Select for Scitex CT (SCT) files. 6023 Select for Sun Raster (RAS) files. 6024 Select for Tag Image File Format CCITT (TIFF) files. 6025 Select for Targa (TGA) files. 6026 Select for Windows Bitmap (BMP) files. 6027 Select for Device Independent Bitmap (DIB) files. 6028 Select to view all Windows Metafile (WMF) files. 6029 Select to view all Flash Pix (FPX) files. 9900 Click to save to a file. 9901 Click to open a file. 9902 Click to reset current changes. 9903 Click to reset the changes made to all channels. 9904 Click to preview changes on the image. 9906 Brush Style~Click to select a style. 9909 Click to unlock sliders. 9910 Click to lock sliders together. 10000 Selector Tool~Click to select and modify objects. 10001 Selector Transform Tool~Click to transform the object. 10002 Mask Tools~Click to display the set of Mask tools. 10003 Crop Tool~Click to crop the image. 10004 Retouch Tools~Click to display the set of Retouch tools. 10005 Filter Tools~Click to display the set of Filter tools. 10006 Fill Tools~Click to display the set of Fill tools. 10007 Draw Tools~Click to display the set of Draw tools. 10008 View Tool~Click to choose viewing options. 10009 Text Tool~Click to enter and edit text. 10010 Color Probe~Click to probe colors in the image. 10011 Click to activate or deactivate the Grabber tool. 10012 Click to change Active or Alternate colors. 10013 Smart Mask Wand Range~Enter the percentage of color variance for the Smart Mask. (0-100 %%) 10014 Smart Mask Wand Fade~Enter the percentage for the Smart Mask to fade. (0-100 %%) 10015 Warp Tool~Click to warp the current selection. 10019 Paint On Mask Tool~Click to paint masks on the image or modify object's alpha channel. 10020 Freehand Mask Tool~Click to draw freehand masks. 10021 Shape Mask Tool~Click to draw rectangular or elliptical masks. 10023 Smart Mask Tool~Click to create a mask based on like colors. 10025 Mask Transform Tool~Click to transform masks or masked areas. 10026 Mask Point Editing Tool~Click to edit the points of a mask. 10028 Path Editing Tool~Click to make a vector path. 10030 Paint Tool~Click to paint on the image or selected object. 10031 Airbrush Tool~Click to apply color as a spray can to the image or selected object. 10032 Clone Tool~Click to copy a portion of the image or object to another portion. 10033 Texture Tool~Click to paint with a texture. 10034 Smear Tool~Click to blend or smear colors in the image or selected object. 10035 Eraser Tool~Click to erase edits or with a color. 10036 Image Spray Tool~Click to spray a collection of predefined objects. 10040 Sharpen Tool~Click to sharpen the image with a brush. 10041 Smooth Tool~Click to smooth the image with a brush. 10042 Lighten Tool~Click to lighten the image with a brush. 10043 Darken Tool~Click to darken the image with a brush. 10044 Stitch~Click to activate the Stitch tool. 10050 Gradient Fill Tool~Click to fill the image or selected object with a gradient. 10051 Smart Fill Tool~Click to fill like areas of color with the active color. 10052 Texture Fill Tool~Click to fill the image or selected object with a texture. 10053 Tint Fill Tool~Click to fill the image or selected object with the active color. 10060 Pencil Tool~Click to draw polyline shapes. 10061 Shape Draw Tool~Click to draw rectangular or elliptical shapes. 10062 Freehand Draw Tool~Click to draw freehand closed shapes. 10070 Click to select a command in the View menu. 10071 View Actual Size~Click to view at actual size. 10072 View Entire Image~Click to view the entire image. (Home) 10073 Previous View~Click to return to the previous view. (End) 10074 Full Screen View~Click to see a full-screen view of the image. Press ESC to exit. 10078 QuickZoom~Click to open the QuickZoom window. 10079 Zoom In~Click to Zoom In. (Page Up) 10080 Zoom Control~Type or select desired percentage to Zoom. 10081 Zoom Out~Click to Zoom Out. (Page Down) Press (ALT + Zoom) for multiple zoom out. 10082 Zoom Functions~Click to select zoom function. 10083 Zoom In~Click to Zoom In. (Page Up) Press (ALT + Zoom) for multiple zoom in. 10084 Zoom Out~Click to Zoom Out. (Page Down) Press (ALT + Zoom) for multiple zoom out. 10085 Size Window On Zoom~Click to size the window when using the View tool. 10101 Click to select a command in the File menu. 10102 Click to select a command in the Edit menu. 10103 Click to create a new palette. 10104 Click to load an existing palette. 10105 Click to save the palette. 10106 Click to save the palette with a new name. 10107 Click to combine a new palette with the current one. 10108 Click to reopen the palette. 10110 Click to undo or redo the last edit. 10111 Click to insert a new color. 10113 Click to delete the current color. 10114 Click to add or change the color label. 10115 Click to find a color by name. 10116 Click to fill from the current color to the next color. 10117 Click to select how palette colors are arranged. 10118 Click to set the current color as the active color. 10119 Click to set the active or alternate color in the main toolbar when selecting palette colors. 10160 Enter amount to smooth mask (0-50 pixels). 10200 Click to select a color. (Double click to change color.) 10203 Palette Options Button~Click to launch the palette options menu. 10220 Click to place the scroll bar along the bottom of the palette. 10221 Click to place the scroll bar along the right side of the palette. 10240 Click to fill using RGB color model. 10241 Click to fill using HSL color model. 10242 Click to fill maximum colors without duplicates. 10243 Enter the number of entries to fill. 10262 Click to return to the previous color found. 10263 Click to advance to the next color found. 10266 Enter the color to find. 10300 Enter the new color label. 10391 Click to reset new color to original. 10394 Click to set the color to pure black. 10395 Click to set the color to pure white. 10400 Click to select a new color. 10402 Click to reset new color to original. 10405 Adjust slider to set value. 10406 Enter the Hue value. (0-359 degrees) 10407 Enter the Saturation value. (0-100 %%) 10408 Enter the Lightness value. (0-100 %%) 10409 Enter the Red value. 10410 Enter the Green value. 10411 Enter the Blue value. 10412 Enter the Cyan value. 10413 Enter the Magenta value. 10414 Enter the Yellow value. 10415 Enter the Black value. 10416 Click to select the method of slicing the color cube. 10417 Select to modify Hue with slider, and Saturation and Lightness in the color space. 10418 Select to modify Saturation with slider, and Hue and Lightness in the color space. 10419 Select to modify Lightness with slider, and Hue and Saturation in the color space. 10420 Select to modify Red with slider, and Green and Blue in the color space. 10421 Select to modify Green with slider, and Red and Blue in the color space. 10422 Select to modify Blue with slider, and Red and Green in the color space. 10423 Select to modify Cyan with slider, and Magenta and Yellow in the color space. 10424 Select to modify Magenta with slider, and Cyan and Yellow in the color space. 10425 Select to modify Yellow with slider, and Cyan and Magenta in the color space. 10426 Select to modify Black with slider, and Cyan, Magenta, and Yellow in the color space. 10427 Enter Hue value 10428 Enter Saturation value 10429 Enter Lightness value 10430 Enter Red value 10431 Enter Green value 10432 Enter Blue value 10433 Enter Cyan value 10434 Enter Magenta value 10435 Enter Yellow value 10437 Click to set active color. 10438 Click to set alternate color. 10468 Enter fade value for Chroma Mask. (0-100%%) 10470 Enter the amount to feather. 10471 Click to select edge type. 10472 Click to create a hard feathered edge. 10473 Click to create a normal feathered edge. 10474 Click to create a soft feathered edge. 10475 Click to select direction of feather. 10476 Click to feather outside the mask. 10477 Click to feather both inside and outside the mask. 10478 Click to feather inside the mask. 10500 Click to save preferences for future sessions. 10501 Click to set the paths of the support files. 10504 Click to turn on snap to grid for every image that is opened. 10506 Click to adjust the grid width. 10508 Click to adjust the grid height. 10509 Click to select what units to use for the grid. 10510 Click to use percentage values for color selection. 10511 Click to display rulers with each image. 10512 Enter the width of your screen for an accurate 1:1 view. 10513 Units Preference~Click to change the unit of measure. 10514 Click to change the unit of measure to inches. 10515 Click to change the unit of measure to millimeters. 10516 Click to change the unit of measure to pica and points. 10517 Click to change the unit of measure to centimeters. 10518 Click to change the unit of measure to pixels. 10519 Click to turn the grid on for every image that is opened. 10520 Enter the full path to location for writing temporary files. 10521 Click to turn on snap to guides for every image that is opened. 10524 Click to enable/disable the full rendering of an object when dragging. 10530 Enter the scratchpad width. (1-500 pixels) 10531 Enter the scratchpad height. (1-500 pixels) 10532 Click to set the scratchpad type. 10533 Select to create an 8-bit grayscale scratchpad. 10534 Select to create an 24-bit color scratchpad. 10535 Enter the path to plug-ins. 10536 Enter the path to plug-ins. 10537 Click to allow floating objects. 10538 Click to allow masks on floating objects. 10539 Click to allow tooltips on objects. 10540 Click to enable/disable the Paste At dialog when pasting. 10545 Click to use plug-ins. 10549 Click to open line art images as grayscale. 10550 Click to use independent tool settings. 10551 Click to select a tablet pressure preference. 10552 Select to not use tablet pressure. 10553 Select to vary brush transparency with pressure. 10554 Select to vary brush size with pressure. 10555 Select to vary both transparency and brush size with pressure. 10556 Click to select file type for new or scanned images. 10557 Click to select a startup macro for iGrafx Image. 10559 Click to disable gradient dithering. 10560 Click to select a color preference for the ruby overlay. 10561 Select to use Red for the ruby overlay color. 10562 Select to use Green for the ruby overlay color. 10563 Select to use Blue for the ruby overlay color. 10564 Select to use Cyan for the ruby overlay color. 10565 Select to use Magenta for the ruby overlay color. 10566 Select to use Yellow for the ruby overlay color. 10567 Click to paste images at actual size. 10570 Click to disable auto scrolling. 10574 Click to set object preferences. 10575 Click to set scratchpad preferences. 10576 Click to set plug-ins preferences. 10577 Click to set units preferences. 10578 Click to set undo preferences. 10579 Click to set miscellaneous preferences. 10600 Enter the file name. 10601 Click to select adjust path. 10602 Click to select a different file. 10603 Click to select a different directory. 10604 Click to select a different drive. 10610 Click to save the path when restarting. 10616 Click to view image thumbnails. 10630 Click to disable the undo for editing operations. 10631 Click to disable the undo for masking operations. 10633 Click to disable the Command Center. 10650 Click for file management. 10651 Click to view image information. 10652 Click to copy files. 10653 Click to delete files. 10654 Click to rename files. 10655 Click for thumbnail management. 10656 Click to create thumbnails for selected images. 10657 Click to delete thumbnails for selected images. 10658 Click to delete all existing thumbnails. 10659 Click to cancel. 10660 Click to automatically create thumbnails. 10670 Enter the amount of feathering on the object. 10671 Click to select edge type. 10672 Click to create a hard feathered edge. 10673 Click to create a normal feathered edge. 10674 Click to create a soft feathered edge. 10680 Click to lock or unlock the grid. 10681 Click to draw a new grid (if unlocked) or select a portion to open. 10683 Click to select an interpolation method. 10684 Select To Use Bi Linear Interpolation For Transformation 10685 Select To Use Average Interpolation For Transformation 10686 Select To Use Bi Cubic Interpolation For Transformation 10687 Select To Use Spline Interpolation For Transformation 10688 Select To Use Nearest Neighbor Interpolation For Transformation 10689 Select To Use Quadratic Interpolation For Transformation 10717 Click to learn more about iGrafx Image. 10900 Click to select the type of new image to create. 10901 Select to create a new line art image. 10902 Select to create a new grayscale image. 10904 Select to create a new RGB image. 10905 Select to create a new CMYK image. 11004 High Quality Transform~Click to use high quality interpolation for transformation. 11005 Paste Into Mask~Click to paste into the mask. 11100 Adjust slider to change hue. 11101 Adjust slider to change hue. 11102 Adjust slider to change hue. 11103 Adjust slider to change hue. 11104 Adjust slider to change hue. 11105 Adjust slider to change hue. 11106 Adjust slider to change hue. 11107 Adjust slider to change hue. 11108 Adjust slider to change hue. 11109 Adjust slider to change hue. 11110 Adjust slider to change hue. 11111 Adjust slider to change hue. 11136 Enter the saturation value. (-100-100 %%) 11137 Adjust slider to change saturation value. (-100-100 %%) 11138 Enter the lightness value. (-100-100 %%) 11139 Adjust slider to change lightness value. (-100-100 %%) 11141 Click to change all hues to a single hue. 11142 Enter desired hue value. (0-359 degrees) 11194 Click to switch input axis. 11195 Click to switch output axis. 11196 Click to use Auto Preview. 11197 Enter the default number of points. 11198 Click to turn grid on/off. 11199 Click to toggle between percentages and levels. 11200 Click to select map editing mode. 11203 Select to edit map visually. 11204 Select to edit map numerically. 11205 Click to move the points on the map curve. 11206 Click to probe from the image. 11207 Click to set the mapping options. 11209 Click to toggle between lines and curves. 11211 Enter desired input value. 11212 Enter desired input value. 11213 Enter desired input value. 11214 Enter desired input value. 11215 Enter desired input value. 11216 Enter desired input value. 11217 Enter desired input value. 11218 Enter desired input value. 11219 Enter desired input value. 11220 Enter desired input value. 11221 Enter desired input value. 11223 Enter desired output value. 11224 Enter desired output value. 11225 Enter desired output value. 11226 Enter desired output value. 11227 Enter desired output value. 11228 Enter desired output value. 11229 Enter desired output value. 11230 Enter desired output value. 11231 Enter desired output value. 11232 Enter desired output value. 11233 Enter desired output value. 11234 Click to shift the map up. 11235 Click to shift the map down. 11236 Click to shift the map left. 11237 Click to shift the map right. 11238 Adjust the slider to change map gamma. 11252 Click to maintain density of the image. 11260 Select desired curve smoothness. 11301 Enter the number of levels to posterize. (0-255) 11302 Adjust the slider to change the number of levels. (0-255) 11303 Enter the threshold level. (0-100 %%) 11304 Adjust the slider to change the threshold level. (0-100 %%) 11307 Click to save the current map. 11308 Click to load a previously saved map. 11309 Press and drag to adjust values. 11310 Enter any additional contrast. (-100-100 %%) 11311 Enter any additional brightness. (-100-100 %%) 11312 Click to use map for all channels. 11314 Click to use map for grayscale scans. 11315 Click to use map for color scans. 11350 Click to reset all changes made to image. 11351 Click to adjust the image. 11352 Click to adjust the image. 11353 Click to adjust the image. 11354 Click to adjust the image. 11356 Click to adjust the image. 11357 Click to adjust the image. 11358 Click to adjust the image. 11359 Click to adjust the image. 11398 Adjust slider to set the amount of change per adjustment. 11400 Click to select a channel to adjust. 11401 Select to affect all channels. 11402 Select to affect the Red channel. 11403 Select to affect the Green channel. 11404 Select to affect the Blue channel. 11405 Select to affect the Cyan channel. 11406 Select to affect the Magenta channel. 11407 Select to affect the Yellow channel. 11408 Select to affect the Black channel. 11410 Click to select channel to edit. 11411 Select to edit red color channel. 11412 Select to edit green color channel. 11413 Select to edit blue color channel. 11414 Select to edit gray channel. 11420 Click to select tonal range to adjust. 11421 Select to adjust full tonal range. 11422 Select to adjust highlights. 11423 Select to adjust midtones. 11424 Select to adjust shadows. 11500 Light blend pressure. 11501 Medium blend pressure. 11502 Heavy blend pressure. 11505 Brush Shape~Click to select a shape. 11506 Circle 11507 Square 11508 Horizontal 11509 Vertical 11510 Slash 11511 Backslash 11512 Select to use a custom brush. 11513 Select to choose a new custom brush. 11514 Brush Size~Enter the brush size. (1-999 pixels) 11516 Smart Fill Range~Enter the range of color values to be included. (0-100 %%) 11517 Brush Edge Feathering Amount~Enter the amount of brush feathering. (0-100 %%) 11518 Gradient Midpoint Value~Enter the percentage to set the midpoint of the gradient. (0-100 %%) 11519 Transparency~Enter the transparency amount. (0-99 %%) 11520 Transparency~Adjust slider to change the transparency amount. (0-99 %%) 11521 Brush Pressure~Enter the amount of pressure. (0-100 %%) 11523 Brush Pressure Amount~Enter the amount of pressure. (0-100 %%) 11524 Smart Fill Fade~Enter the amount to fade the Smart Fill. (0-100 %%) 11526 Click to select a grid to use for warping. 11527 Warp Factor~Click to adjust the region outside of the brush to be pushed or pulled. 11528 Warp Mode~Click to select what type of warp to be used. 11529 Warp Grid~Click to select a grid to use for warping. 11530 Clone Source~Click to set clone source. 11534 Warp Image~Click to launch the Image Warp dialog box. 11535 Warp Sensitivity~Click to adjust the sensitivity of the image pull or push. 11540 Spacing~Enter the amount of brush spacing. (0-100 %%) 11541 Enter the amount of brush fading. (0-100 %%) 11544 Click to allow brush strokes to overlap. 11545 Enter the amount of smoothness. (0-100 %%) 11546 Enter the amount of scattering for the scattered brush. (0-100 %%) 11547 Press and drag to test style. 11548 Click to clear the brush preview area. 11549 Image Spray Options~Click to select options for the Image Spray Tool. 11553 Click to set the previewing mode to auto preview. 11561 Click to create a solid brush. 11562 Click to create a scattered brush. 11565 Brush Styles~Click to select a brush style. 11571 Textures~Click to select a texture. 11572 Click to select a texture. 11573 Click to rename the selected texture. 11574 Click to add a new texture. 11575 Click to remove the selected texture. 11576 The name of the brush shape over which the mouse pointer is moving. 11577 Click to select a brush shape. 11578 Click to add a new brush shape. 11579 Click to rename the selected brush shape. 11580 Click to remove the selected brush shape. 11582 Click to select a new brush category. 11583 Enter a name for the brush. 11601 AutoMask Sensitivity~Enter the AutoMask sensitivity. (1-5) 11602 AutoMask Minimum Line Length~Enter the AutoMask minimum line length. (1-50 pixels) 11603 Freehand Mask Methods~Click to select a drawing method for masks. 11611 Color Model~Click to select the color model used for edge detection. 11612 Select to use the Normal (RGB) color model. 11613 Select to use the HSL color model. 11621 Edge Detection Continuity~Enter continuity value. (0-20) 11622 Edge Detection Curve Tolerance~Enter curve tolerance value. (0-99) 11623 Expand Mask~Click to expand the wand range. (0-100 %%) 11624 Expand Mask Amount~Enter the amount to add to the wand range. (0-99 %%) 11625 Find Similiar Colors~Click to apply Smart Mask to the entire image. 11628 Edge Detection Tolerace~Enter the tolerance. (0-99 pixels) 11641 Cusp Mode~Click to unlock the point handles for cusp mode. 11642 Symmetrical Mode~Click to re-lock the point handles for symmetrical mode. 11643 Select All Points~Click to select all points within the path. 11650 Mask Point Editor Method~Click to select Mask Point Editor method. 11651 Select to edit points as line segments. 11652 Select to edit points as Bézier curves. 11701 Click to position the lens flare. 11702 Click to adjust the aspect ratio of the flare. 11703 Click to adjust the aspect ratio of the flare. 11705 Click to select a Lens Flare preset combination. 11706 Click to delete a Lens Flare preset. 11707 Click to save the current Lens Flare settings into a preset. 11709 Flares 11710 Rays 11711 Last Used 11712 Default 11713 Can't Delete Default Settings. 11714 Can't OverWrite Default Settings. 11715 The Name '%s' exists, do you wish to overwrite? 11731 Click to adjust the size of the flare. 11732 Click to adjust the size of the flare. 11734 Click to adjust the brightness of the flare. 11735 Click to adjust the brightness of the flare. 11737 Click to adjust the light falloff of the flare. 11738 Click to adjust the light falloff of the flare. 11741 Click to adjust the size of the flare halo. 11742 Click to adjust the size of the flare halo. 11744 Click to adjust the brightness of the flare halo. 11745 Click to adjust the brightness of the flare halo. 11748 Click to adjust the size of the flare tails. 11749 Click to adjust the size of the flare tails. 11751 Click to adjust the brightness of the flare tails. 11752 Click to adjust the brightness of the flare tails. 11761 Click to adjust the number of lens flare rays. 11762 Click to adjust the number of lens flare rays. 11764 Click to adjust the brightness of the lens flare rays. 11765 Click to adjust the brightness of the lens flare rays. 11767 Click to rotate the rays of the lens flare. 11768 Click to rotate the rays of the lens flare. 11770 Click to adjust the intensity of the ray streaks. 11771 Click to adjust the intensity of the ray streaks. 11773 Click to adjust the sharpenss/softness of the ray streaks. 11774 Click to adjust the sharpenss/softness of the ray streaks. 11777 Click to adjust the radial noise of the lens flare rays and streaks. 11779 Click to adjust the size noise of the lens flare. 11781 Click to adjust the brightness of the anamorphic light. 11782 Click to adjust the brightness of the anamorphic light. 11784 Click to rotate the anamorphic light ray. 11785 Click to rotate the anamorphic light ray. 11800 Fill Style~Click to select the fill style of the Shape Draw tool. 11801 Select to draw a rectangular border. 11802 Select to fill the interior of a rectangle. 11803 Select to draw a rectangular border and fill the interior. 11804 Select to draw an elliptical border. 11805 Select to fill the interior of the ellipse. 11806 Select to draw an elliptical border and fill the interior. 11808 Fill Style~Click to select the fill style of the Freehand Draw tool. 11809 Select to draw a freehand border. 11810 Select to fill the interior of a freehand shape. 11811 Select to draw a freehand border and fill the interior. 11900 Enter the height adjustment. 11901 Enter the width adjustment. 11902 Enter the resolution adjustment. 11903 Enter the scaling percentage adjustment. 11904 Enter the scaling percentage adjustment. 11906 Click to allow size distortions. 11907 Click to use a high quality transformation. 11909 Click to maintain file size. 11910 Enter the amount of width to grow the mask. 11911 Enter the amount of width to shrink the mask. 11912 Enter the amount of height to grow the mask. 11913 Enter the amount of height to shrink the mask. 12000 Enter the angle to rotate the image (0.0-359.9 degrees). 12001 Click to rotate image clockwise. 12002 Click to rotate image counterclockwise. 12003 Measure Probe Angle~Click to import Measure Probe correction angle. 12202 Click to change the page setup view. 12203 Select to visually set up page. 12204 Select to precisely set up page. 12208 Position the image on the page. Drag edges to resize. 12210 Enter position of image from the left of the page. 12211 Enter position of image from the top of the page. 12212 Click to center image on page. 12213 Click to print using ScatterPrint. 12214 Click to reset print settings. 12215 Click to select print device. 12216 Click to set up printer and print style options. 12250 Click to select type of output. 12251 Select to print grayscale. 12252 Select to print full color. 12253 Select to print full color and grayscale. 12254 Select to print black ink separations. 12255 Select to print color ink separations. 12302 Click to set up print style. 12303 Click to print with trim marks. 12304 Click to print with registration marks. 12305 Click to print with separation labels. 12306 Click to print with steps scale. 12307 Click to print negative. 12308 Click to print mirror for emulsion down. (PostScript devices only.) 12309 Click to print using binary PostScript. 12310 Click to use the defaults of the printer. 12311 Click to send only the necessary information to the printer. 12321 Click to save changes. 12322 Click to select printer type. 12324 Select for CMYK output devices. 12325 Select for RGB output devices. 12405 Click to select a printer calibration map. 12407 Click to manage the printer calibration maps. 12417 Click to select black generation map. 12419 Click to manage the black generation maps. 12500 Click to select a halftone dot style. 12501 Select for circular halftone dot. 12502 Select for square halftone dot. 12503 Select for elliptical halftone dot. 12504 Enter screen frequency for Cyan separation. 12505 Enter screen frequency for Magenta separation. 12506 Enter screen frequency for Yellow separation. 12507 Enter screen frequency for Black separation. 12508 Enter screen angle for Cyan separation. 12509 Enter screen angle for Magenta separation. 12510 Enter screen angle for Yellow separation. 12511 Enter screen angle for Black separation. 12512 Enter minimum highlight dot percentage. (0-100 %%) 12513 Enter maximum highlight dot percentage. (0-100 %%) 12514 Click to use printers default halftone values. 12519 Enter the dot gain value. (0-100 %%) 12520 Click to apply calibration during conversion to CMYK. 12521 Click to apply calibration during print. 12601 Drag color sliders to set recipe for Red. 12602 Drag color sliders to set recipe for Green. 12603 Drag color sliders to set recipe for Blue. 12604 Enter Magenta percentage in Red. (0-100 %%) 12605 Enter Yellow percentage in Red. (0-100 %%) 12606 Enter Yellow percentage in Green. (0-100 %%) 12607 Enter Cyan percentage in Green. (0-100 %%) 12608 Enter Cyan percentage in Blue. (0-100 %%) 12609 Enter Magenta percentage in Blue. (0-100 %%) 12610 Enter black removal percentage. (0-100 %%) 12611 Enter black limit percentage. (0-100 %%) 12612 Enter total ink limit percentage. (0-400 %%) 12614 Enter saturation boost percentage. (0-100 %%) 12642 Click to use color management for print separation. 12650 Click to select a scanner calibration map. 12652 Click to manage scanner calibration maps. 12653 Click to select a printer calibration map. 12701 Click to edit the Yellow separation calibration map. 12702 Click to edit the Magenta separation calibration map. 12703 Click to edit the Cyan separation calibration map. 12704 Click to edit the Black separation calibration map. 12705 Click to select calibration method. 12706 Select to calibrate by measurement. 12707 Select to calibrate visually. 12710 Click to select color plate to view. 12711 Select to view cyan color plate. 12712 Select to view magenta color plate. 12713 Select to view yellow color plate. 12714 Select to view black color plate. 12720 Click to select scan map type. 12721 Select to edit gray calibration map. 12722 Select to edit color calibration map. 12801 Add Light~Click to add a light. 12802 Delete Light~Click to delete the selected light. 12803 Click to adjust the distance between the selected light and the image. 12804 Click to adjust the distance between the selected light and the image. 12807 Click to preview the current light settings on the full image. 12808 Use this area to select, move, or adjust lights. 12810 Normal Light~Click to select Normal Lighting Mode on the currently selected light. 12811 Embossed Light~Click to select Embossed Lighting Mode on the currently selected light. 12812 Special Effect Light~Click to select Special Effects Lighting Mode on the currently selected light. 12826 Click to choose the type of light to be used. 12827 Click to change the intensity of the currently selected light. 12828 Click to change the intensity of the currently selected light. 12830 Click to change the aperture of the currently selected light. 12831 Click to change the aperture of the currently selected light. 12833 Click to change the amount of ambient light (Room Lighting). 12834 Click to change the amount of ambient light (Room Lighting). 12836 Click to change exposure amount on the image. 12837 Click to change exposure amount on the image. 12839 Click to enable/disable Gloss Finish Lighting (Phong Lighting). 12840 Click to change the amount of gloss reflections on the image. 12841 Click to change the amount of gloss reflections in the image. 12843 Click to change the amount of gloss absorbence in the image. 12844 Click to change the amount of gloss absorbence in the image. 12846 Click to change the color of ambient light. 12850 Click to select a Light Studio preset light combination. 12851 Click to save the current light settings into a preset. 12852 Click to delete the currently selected preset. 12861 Click to select the channel source for bumping. 12864 Click to tile the external bitmap bump. 12865 Click to center the external bitmap bump. 12866 Click to stretch the externam bitmap bump. 12867 Click to adjust the height of the bump map(s). 12868 Click to adjust the height of the bump map(s). 12870 Click to adjust the blending of the channel bump and the external bitmap bump. 12871 Click to adjust the blending of the channel bump and the external bitmap bump. 12873 Click to invert the bump map(s). 12875 Click to enable/disable an external bitmap bump. 12880 Lighting 12881 Bumping 12882 Omni 12883 Directional 12884 Flood 12885 Spot 12887 Embossed 12888 Gray 12889 Bevel Factory 12890 Presets 12900 Click to keep active when the dialog box is closed. 12921 Click to probe color 1 from the image. 12922 Click to probe color 2 from the image. 12923 Click to probe color 3 from the image. 12924 Click to probe color 4 from the image. 12925 Click to probe color 5 from the image. 12926 Click to probe color 6 from the image. 12927 Click to probe color 7 from the image. 12928 Click to probe color 8 from the image. 12931 Enter the range percent. (0-100 %%) 12932 Enter the range percent. (0-100 %%) 12933 Enter the range percent. (0-100 %%) 12934 Enter the range percent. (0-100 %%) 12935 Enter the range percent. (0-100 %%) 12936 Enter the range percent. (0-100 %%) 12937 Enter the range percent. (0-100 %%) 12938 Enter the range percent. (0-100 %%) 12941 Click to turn range on/off. 12942 Click to turn range on/off. 12943 Click to turn range on/off. 12944 Click to turn range on/off. 12945 Click to turn range on/off. 12946 Click to turn range on/off. 12947 Click to turn range on/off. 12948 Click to turn range on/off. 12950 Click to select or protect colors in the image. 12951 Select to modify the activated color ranges in the image. 12952 Select to protect the activated color ranges in the image. 12953 Click to select color model on which to base color selection. 12971 Click to adjust the width of the bevel in pixels. 12972 Click to adjust the width of the bevel in pixels. 12974 Click to enable/disable colored light. 12976 Click to adjust the amount of smoothing applied to the bevel. 12977 Click to adjust the amount of smoothing applied to the bevel. 12979 Click to adjust the amount of light intensity. 12980 Click to adjust the amount of light intensity. 12982 Click to adjust the amount of highlight brightness. 12983 Click to adjust the amount of highlight brightness. 12985 Click to adjust the amount of shadow darkness. 12986 Click to adjust the amount of shadow darkness. 12988 Click to preview the current settings. 12989 Previews the current Bevel Factory settings. 12990 Click to adjust the direction of the light source. 12991 Click to select the shape for the bevel. 12992 Click to launch Light Studio for more light source options. 12993 Select from this list of bevel shapes. 12994 Select from this list of bevel shapes. 12995 Click to enable/disable Outer Bevel on masks only. 12996 Click to preserve the interior of the non-beveled area. 12997 Click to invert the bevel shape edge. 12998 Click to wrap a texture on the bevel. 12999 Click to select a texture to wrap on the bevel. 13000 Gradient Type~Click to select a type of gradient. 13001 Select to create linear gradient. 13002 Select to create radial gradient. 13003 Select to create circular gradient. 13004 Select to create elliptical gradient. 13005 Select to create square gradient. 13006 Select to create rectangular gradient. 13007 Gradient Sweep Repeat~Enter the number of times to repeat color sweep. (1-99) 13008 Gradient Transition Type~Click to select the type of gradient color transitions. 13009 Select to create a hard transition. 13010 Gradient Transition Type~Select to create a soft transition. 13023 Gradient Gallery~Click to select a gradient style from the gradient gallery. 13024 RGB/HSL Mode~Click to select what color mode to use for the gradient. 13035 Click to probe the image to select a color for the gradient. 13036 Click to adjust the location of the currently selected color. 13038 Click to adjust the transparency amount of the currently selected transparency swatch. 13039 Gradient Preview~Preview of the current gradient. 13040 Transparency Ramp (Click below the ramp to add a color slider). 13041 Gradient Color Mixer (Click below the ramp to add a color slider). 13043 Slide this to move the current location of the transparency slider. 13044 Slide this to move the midpoint between the closest left and right colors. 13045 Slide this to move the current location of the color slider. 13048 Click to Save the current settings to the currently selected preset. 13049 Click to Save the current settings to a new gradient. 13100 The name of the texture over which the mouse pointer is moving. 13101 Flip Texture Horizontally~Click to flip texture horizontally. 13102 Flip Texture Vertically~Click to flip texture vertically. 13202 Click to use color prescan. 13203 Select area to scan. 13204 Click to prescan the image. 13205 Click to lock the scan size. 13208 Click to scan at speed 1. 13209 Click to scan at speed 2. 13210 Click to scan at speed 3. 13211 Click to scan at speed 4. 13212 Click to scan at speed 5. 13214 Click to mirror image while scanning. 13215 Click to invert image while scanning. 13216 Click to use DMA. 13217 Click to check the levels of gray in the image. 13218 Click for additional options. 13220 Click to select the type of image to scan. 13221 Click to scan image as line art. 13222 Click to scan image as grayscale. 13223 Click to scan image as color. 13300 Click to preview effect. 13301 Click to reset preview. 13302 Click to apply effect to image. 13303 Options for the special effect. 13304 Click to apply the effect inside or outside the masked area. 13306 Select an area to preview effect. 13400 Enter the text string. 13401 Font Type Selection~Click to select a typeface. 13402 Font Point Size~Enter the text point size. (1-500 points) 13403 Italic~Click for italicized text. 13404 Underline~Click for underlined text. 13408 Bold~Click for bold text. 13410 Text Angle~Enter the angle for the text. (-359-359) 13411 Anti-Alias~Click for anti-aliased text. 13414 Left Justify~Click to left justify text. 13415 Right Justify~Click to right justify text. 13416 Center Justify~Click to center justify text. 13417 Vertical~Click for Vertical Text. 13500 Constrain Method~Click to select constrain method for drawing. 13501 Select to allow free and unconstrained drawing. 13502 Select to constrain drawing to the ratio of width and height. 13503 Select to constrain drawing to a fixed unit width and height. 13510 Vertical Units~Enter the number of vertical units. 13511 Horizontal Units~Enter the number of horizontal units. 13512 Mask Shape~Click to select a mask shape. 13513 Select to draw a rectangular mask shape. 13514 Select to draw an elliptical mask shape. 13600 Control to display Status and Hints. 13601 Image properties~Click to view properties. 13602 Color Shields~Click to show or hide the Color Shields. 13604 Color Palette~Click to show or hide the Color Palette. 13606 Mask Channel~Click to edit the image or its mask channel. (Shift+F12) 13607 Ruby Overlay~Click to create a normal view or to view with a ruby overlay. (Shift+F11) 13700 Click to select a name from the list. 13701 This DOS file corresponds to the name in the list. 13702 Options~Click to manage files in the list. 13703 Click to manage files in the list. 13706 Options~Click for additional options. 13707 Select to Create a style. 13708 Select to Edit an existing style. 13709 Select to Add an additional file to the list. 13710 Select to Delete the list entry and the DOS file. 13711 Select to Rename the list entry. 13800 Enter amount of highlights sacrificed. 13801 Enter amount of shadows sacrificed. 13803 Press and drag markers to change values. 13807 Click to probe the maximum shadow value from the image. 13808 Click to probe the midtone value from the image. 13809 Click to probe the minimum highlight value from the image. 13810 Enter shadow value. 13811 Enter midtone value. 13812 Enter highlight value. 13813 Enter maximum highlight output value. 13814 Enter minimum shadow output value. 13815 Click to automatically set tonal range. 13816 Click to use midtone as a percentage. 13817 Press and drag tag to set value. 13901 Command Center Undo~Click to undo commands using the Command Center. 13902 Command Center Redo~Click to redo commands using the Command Center. 14300 Click to measure values from image. 14301 Enter the value. 14302 Enter the value. 14303 Enter the value. 14304 Enter the value. 14305 Enter the value. 14306 Enter the value. 14307 Enter the value. 14308 Enter the value. 14309 Enter the value. 14310 Enter the value. 14311 Enter the value. 14321 Enter the value. 14322 Enter the value. 14323 Enter the value. 14324 Enter the value. 14325 Enter the value. 14326 Enter the value. 14327 Enter the value. 14328 Enter the value. 14329 Enter the value. 14330 Enter the value. 14331 Enter the value. 14341 Enter the value. 14342 Enter the value. 14343 Enter the value. 14344 Enter the value. 14345 Enter the value. 14346 Enter the value. 14347 Enter the value. 14348 Enter the value. 14349 Enter the value. 14350 Enter the value. 14351 Enter the value. 14361 Enter the value. 14362 Enter the value. 14363 Enter the value. 14364 Enter the value. 14365 Enter the value. 14366 Enter the value. 14367 Enter the value. 14368 Enter the value. 14369 Enter the value. 14370 Enter the value. 14371 Enter the value. 14390 Click to copy to the ClipboardBrowser. 14391 Click to copy to a new image. 14392 Click to copy to a texture. 14393 Click to copy to a custom brush. 14500 Mask Transform Functions~Click to select the Mask Transform tool options. 14501 Select to transform a copy of the mask. 14502 Select to transform the mask. 14503 Select to transform a copy of the masked portion of the image. 14504 Select to transform a cut-out masked portion of the image. 14510 Transformation Method~Click to select a transformation mode. 14511 Scale~Select to resize the side of the object proportionally or individually. 14512 Skew~Select to skew the selection horizontally or vertically. 14513 Perspective~Select to shrink or expand one side of the selection simulating perspective. 14514 Distort~`Select to move all 4 corners of the selection independently. 14520 Flip Horizontally~Click to flip the selection horizontally. 14521 Flip Vertically~Click to flip the selection vertically. 14522 Normal Rotation~Click to rotate the selection normally. 14523 X Axis Rotation~Click to rotate the selection around the horizontal axis. 14524 Y Axis Rotation~Click to rotate the selection around the vertical axis. 14700 Color Probe Method~Click to select the probing method for the tool. 14701 Point Probe~Select to browse colors in the image. 14702 Rectangular Area Probe~Select to sample colors in a rectangular area. 14703 Multi Probe~Click to probe multiple colors in the image. 14704 Measure Tool~Select to measure points, distances & angles in the image. 14801 Adjust slider to change Red gamma component. 14802 Enter the Red gamma value. 14804 Adjust slider to change Green gamma component. 14805 Enter the Green gamma value. 14807 Adjust slider to change Blue gamma component. 14808 Enter the Blue gamma value. 14810 Click to disable monitor gamma. 14860 Click to select preview TIFF type. 14861 Select for no TIFF preview. 14862 Select for line art preview. 14863 Select for grayscale preview. 14864 Select for color preview. 14866 Click to include composite image. 14869 Click to always show this dialog box when saving. 14870 Click to save the TIFF using LZW compression. 14871 Click to use LZW differencing when compressing TIFF. 14872 Click to save the file using LZW compression. 14873 Click to save the mask channel with the file. 14874 Click to save work in progress in the file. 14875 Click to save the Command Center with the file. 14877 Click to save link to orginal file. 14881 Click to add at the end of the AVI file. 14882 Click to insert image at a specified point in the AVI file. 14883 Click to replace specified frame in the AVI file. 14884 Enter position to insert frame. 14885 Enter position to replace frame. 14886 Click to clip image to fit video. 14887 Click to size image to fit video. 14888 Click to always show the compression dialog box when saving. 14900 Enter the path to the texture files. 14901 Enter the path to the scanner drivers. 14902 Enter the path to the named clipboards. 14903 Enter the path to the special effects. 14905 Enter the path to the print styles. 14906 Enter the path to the brush styles. 14907 Enter the path to the palettes. 14908 Enter the path to the macros. 15000 View Circle Marker~Click to bring the circle marker into view. 15001 View Square Marker~Click to bring the square marker into view. 15004 Show/Hide Circle Marker#1~Click to show or hide the #1 circle marker. 15005 Show/Hide Circle Marker#2~Click to show or hide the #2 circle marker. 15006 Show/Hide Square Marker#1~Click to show or hide the #1 square marker. 15007 Show/Hide Square Marker#2~Click to show or hide the #2 square marker. 15008 Click to automatically align the markers. 15009 Click to stitch the images together. 15100 Click to adjust the brightness of the transformed image. 15102 Adjust slider to set the brightness level of the transformed image. 15103 Click to blend the seam of stitched images. 15104 Click to use a high quality stitching transformation. 15105 Click to select the image to transform. 15106 Click to select the image to transform. 15108 Adjust slider to set the pressure of the blend. 15340 Click to select the number of palette colors. 15341 Select to convert image to 256 colors. 15342 Select to convert image to 16 colors. 15343 Select to convert image to 8 colors. 15344 Select to convert image to a custom number of colors. 15350 Enter the number of colors for conversion. 15360 Click to select type of dither. 15361 Select for no dither. 15362 Select for patterned dither. 15363 Select for scattered dither. 15370 Click to select the type of palette to use. 15371 Select for optimized color palette based on the image. 15372 Select for evenly spaced color palette. 15373 Select for custom color palette. 15501 Enter the source filename. 15502 Enter the destination filename. 15600 Merge Mode~Click to select the merge mode. 15601 Texture Scaling Amount~Enter the amount of texture scaling. (0-999 %%) 15602 Click to scale the current image spray collection. 15700 Enter the number of entries in new palette. 15701 Click to create an optimized palette from the active image. 15830 Click to select amount of image compression. 15831 Select to compress image less. 15832 Select to compress image normally. 15833 Select to compress image more. 15834 Select to enter custom image compression parameters. 15840 Click to select chrominance component subsampling. 15841 Select for Low resolution 4:1:1 subsampling. 15842 Select for Medium resolution 4:2:2 subsampling. 15843 Select for High resolution 4:4:4 subsampling. 15850 Enter the luminance quantization (-8-100 %%). 15851 Enter the chrominance quantization (-8-100 %%). 15900 Click to select data type of image to open. 15901 Select for 8-Bit Grayscale. 15902 Select for 24-Bit Full Color. 15910 Click to select resolution of image to open. 15911 Select for Thumbnail resolution (128 x 192). 15912 Select for Low resolution - Snapshot (256 x 384). 15913 Select for Medium resolution - TV-comparable (512 x 768). 15914 Select for High resolution - HDTV (1024 x 1536). 15915 Select for Full detail - Photographic-quality (2048 x 3072). 15916 Select for Pro detail - Pro-Resolution (4096 x 6144). 15922 Click to update preview image. 15923 Press and drag to select an area to be opened. Double click for entire image. 15924 Enter brightnes balance value. 15925 Enter red balance value. 15926 Enter green balance value. 15927 Enter blue balance value. 15928 Enter saturation balance value. 15929 Click to show out of gamut color on the preview. 15930 Click to remove scene balance adjustment. 16020 Bring Forward~Brings the selected object(s) up one layer. 16021 Send Backward~Sends the selected object(s) down one layer. 16070 Click to enable color managed display. 16071 Click to set up color manager options. 16185 Enter number of times for macro to repeat. (0-999) 16190 Paint On Mask Method~Click to select a mask/alpha channel destination to paint on. 16191 Select to paint on the image mask. 16192 Select to paint on the currently selected object's alpha channel. 16201 Group/Ungroup Objects~Click to group or ungroup the currently selected objects. 16202 Delete Objects~Click to delete the currently selected object(s). 16203 Crop Objects~Click to crop the currently selected object(s). 16204 Edit Object Alpha~Click to edit the alpha channel of the currently selected object(s). 16230 Enter the amount to expand top. 16231 Enter the amount to expand bottom. 16232 Enter the amount to expand left. 16233 Enter the amount to expand right. 16234 Click to select a new color. 16240 Click to delete the current mask before loading a mask. 16250 Enter shape scaling amount. 16303 Overlap Objects~Click to space objects with overlapping. 16320 Image Spray Gallery~Click to view the image spray collections. 16520 Click to select task. 16521 Click to cancel task. 16522 Click to suspend task. 16523 Click to resume task. 16530 Click to select alignment type. 16532 Select to align object(s) relative to the base image. 16533 Select to align object(s) relative to each other. 16534 Select to align object(s) realtive to a mask. 16539 Click to align object(s) to the left. 16540 Click to align object(s) to the right. 16541 Click to align object(s) to the top. 16542 Click to align object(s) to the bottom. 16543 Click to align object(s) to the center. 16544 Click to align object(s) to the middle. 16545 Click to align object(s) equally spaced horizontally. 16546 Click to align object(s) equally spaced vertically. 16550 Double click to change this color. 16551 Click to load a palette. 16552 Click to save palette. 16553 Click to replace image palette with selected palette. 16554 Click to remap image palette with selected palette. 16562 Click to save the current commands as a macro. 16563 Click to show full detail of each command. 16567 Click to save the current commands as a macro. 16570 Select items in the list to be edited. 16571 Click to disable or enable selected items in the list. 16572 Click to delete selected items in the list. 16573 Click to insert items in the list before the currently selected item. 16576 Click to save the current commands as a macro. 16590 Enter new X Position for object. 16591 Enter new Y Position for object. 16610 Click to select image in list. 16611 Click to select macro in list. 16612 Click to delete selected item in the list. 16613 Click to select files to add to the list. 16614 Click to select macros to add to the list. 16615 Click to begin batch processing. 16616 Click to select save options. 16617 Will open and process images one at a time. 16630 Click to close image when macro is completed. 16631 Click to select save option. 16632 Select to not save image when macro is completed. 16633 Select to save over original when macro is completed. 16634 Select to save to a specified path when macro is completed. 16635 Select to save into an album when macro is completed. 16636 Click to select album in which to save image when macro is completed. 16637 Enter path to save image when macro is completed. 16650 Click to select color management profiles. 16651 Click to select a device profile. 16652 Click to select a device profile. 16653 Click to enable the color management system. 16654 Click to select a precision transform. 16655 Click to select a precision transform. 16660 Click to save the precision transform with the file. 16661 Click to preview precision transform curves. 16750 Click to select a command in the Effects Menu. 16751 Effects Browser~Click to select a special effects filter. 17000 OLE 2.0 initialization failed. Make sure that the OLE libraries are the correct version. 17001 \nImage\niGrafx Image Object\nImage Files (*.ppf)\n.ppf\niGrafx.Image.1\niGrafx Image Object 17005 \niGrafx Image\niGrafx Image Tiled Image\n\n\n\niGrafx Image Tiled Image 17006 \niGrafx Image\niGrafx Image Tiled Image\n\n\n\niGrafx Image 1 Tiled Image 17009 Anti-alias Edges~Click to anti-alias edges. 17010 Enter path to copy all support files for the current iGrafx Image file. 17059 Unable to completely delete the OLE object being edited. Please return to iGrafx Image, close the dialog and then close the document containing the object. 17060 Micrografx Image\na Bitmap 17061 Micrografx Image2\na Bitmap 17062 Micrografx Media Manager Image\na Picture 17063 Unable to start the specified application. Please ensure that it has been installed correctly. 17234 Up 17235 Down 17236 Inferno 17237 Candle 17340 Channels 17341 Objects 17342 Info 17349 Channel Manager~Click to select one or all color channels for editing. 17353 Send to Mask Channel~Copy selected channel into the mask channel (ALT+click) 17354 Copy Channel~Copy selected channel to clipboard 17355 Paste Channel~Paste selected channel from clipboard 17356 Save Channel~Save selected channel to an image file 17357 Load Channel~Replace selected channel with an image file 17358 Master RGB 17359 Red Channel 17360 Green Channel 17361 Blue Channel 17362 Master CMYK 17363 Cyan Channel 17364 Magenta Channel 17365 Yellow Channel 17366 Black Channel 17367 Index Channel 17368 Mask Channel 17399 Separate Tabs 17400 Show Channels In Color 17401 Small Thumbnails 17402 Medium Thumbnails 17403 Large Thumbnails 17404 All Channels 17419 Channel Mixer 17420 Channel Mixer Files (*.CHA)|*.cha|| 17421 File is not a valid Channel Mixer file 17422 Image dimensions are not valid 17450 Untitled %s 17451 %s copy 17460 No TWAIN compliant scanners or devices were found. 18003 Click to load a custom toolbox. 18750 Load Shape~Click to load a previously saved shape. 18751 Save Shape~Click to save the current mask as an AI file for use in a EPS clipping path. 18758 Click to create a custom toolbox. 18760 Click to preview chroma mask on the current image. 18761 Select to use normal (RGB) color model for color selection. 18762 Select to use HSL color model for color selection. 18763 Select to use Lightness for selection. 18764 Chroma Mask 18765 This name is a duplicate name. Do you want to replace it? 18768 Toolbar Properties 18769 Reediting will cause you to lose all changes to the object. Do you wish to continue? 18770 This name is an invalid name. Please pick another one. 18771 Disk is Full. Please clear some space and save again without Command List info, or to a different file type. 19001 Inverse Mode~Click to select the inverse mode for masks. 19002 Additive Mode~Click to select the additive mode for masks. 19003 Subtractive Mode~Click to select the subtractive mode for masks. 19004 Select to draw a freehand mask. 19005 Select to draw an edge-detected AutoMask. 19006 Select to edit the points of the mask shape. 19007 Make Bézier Curve~Click to make currently selected point(s) a Bézier curve. 19008 Make Line~Click to make currently selected point(s) a line. 19012 Move Points Mode~Click to move the points of the mask. 19013 Add Points Mode~Click to add points to the mask. 19014 Delete Points Mode~Click to delete points from the mask. 19015 Draw Path Mode~Click to set the Path Tool to drawing mode. 19018 Draw Curves Mode~Click to draw curves with the Freehand Mask tool. 19019 Draw Lines Mode~Click to draw lines with the Freehand Mask tool. 20000 Click to select a command in the File menu. 20001 New~Click to create a blank new image. 20002 Open~Click to open an existing image. 20003 Save~Click to save the active image. 20004 Save As~Click to save the active image with a new filename or type. 20005 Revert to Saved~Click to revert to the last saved version of the active image. 20006 Print~Click to print the active image. 20009 Click to close the active image window. 20010 Click to exit iGrafx Image. 20012 Acquire~Click to acquire an image. 20014 Click to import an image as an object from file. 20015 Print Preview~Click to simulate image on printed output. 20016 Send Mail~Click to Send Mail. 20017 Page Setup~Click to set page settings for the current image. 20019 Click to export the currently selected object to file. 20020 Click to set printer, scanner, monitor, and calibration options. 20021 Setup Printer~Click to set printer options. 20022 Setup Acquire~Click to set the acquire options. 20023 Setup Scanner~Click to set scanner options. 20024 Setup Monitor~Click to set monitor options. 20025 Click to set up calibration for scanning and printing. 20026 Setup Scanner Calibration~Click to calibrate a scanner. 20027 Setup Printer Calibration~Click to calibrate a printer. 20028 GIF Export~Click to Export the active image to CompuServe GIF format using the GIF saver. 20029 Click to play, batch, record, or edit a macro. 20030 Play Macro~Click to play a macro. 20031 Play Batch Macro~Click to play a macro on a batch of files. 20032 Record Macro~Click to record a macro. 20033 Stop Macro~Click to stop recording a macro. 20034 Edit Macro~Click to edit a macro. 20035 JPEG Export~Click to Export the active image to the JPEG compression format using the JPEG preview saver. 20039 Click to package all support files for the current iGrafx Image file. 20079 Export~Click to export the active image. 20100 Click to select a command in the Edit menu. 20103 Cut~Click to cut the image to the clipboard. 20104 Copy~Click to copy the image to the clipboard. 20105 Copy To~Click to copy to the Clipboard Browser, New Image, Texture, or a Custom Brush Tip. 20106 Paste~Click to paste the image from the clipboard. 20107 Paste as New Image~Click to paste the contents of the clipboard as a new image. 20108 ClipboardBrowser~Click to activate the ClipboardBrowser. 20109 Clear~Click to clear the image. 20110 Options~Click to change program defaults. 20111 Paste Special~Click to paste the image in a special OLE form from the clipboard. 20113 Copy to HTML~Click to copy text information to the Clipboard and save the current selection for internet use. 20114 Snapshot~Click to create snapshot. 20115 Purge Undo~Click to purge undo cache which can speed up operations. 20116 Purge Snapshot~Click to purge snapshot cache which can speed up operations. 20117 Purge Clipboard~Click to purge the Windows clipboard which can speed up operations. 20120 Click to select a Command Center operation 20121 Undo~Click to undo single or multiple actions. 20122 Redo~Click to redo single or multiple actions. 20123 Command Center Edit~Click to edit or undo operations on the current image. 20200 Click to select a command in the Map menu. 20201 Modify Color Maps~Click to modify the color maps. 20202 Posterize~Click to change the levels of the image. 20203 Hue Map~Click to change the hues, saturation, and lightness of the image. 20204 Tone Balance~Click to stretch the tonal range between highlights, midtones, and shadows. 20206 Edit Palette~Click to edit the palette of a palette color image. 20207 Hue Shift~Click to shift the hues or adjust the saturation, and lightness of the image. 20208 Histogram~Click to view a histogram of the image. 20209 Threshold~Click to change the threshold of the image. 20210 Click to change image contrast and brightness. 20211 Joystick Contrast/Brightness~Click to change image contrast and brightness precisely. 20212 Visual Contrast/Brightness~Click to change image contrast and brightness visually. 20215 Click to change image color balance. 20216 Joystick Color Balance~Click to change image color balance precisely. 20217 Visual Color Balance~Click to change image color balance visually. 20220 Apply Calibration Maps~Click to select a calibration map to apply to the image. 20300 Click to select a command in the Mask menu. 20301 Undo Mask~Click to undo the last mask edits. 20302 Redo Mask~Click to redo the last mask edits. 20303 Remove Mask~Click to remove the mask from the image. 20304 Load Mask~Click to load a mask file. 20305 Save Mask~Click to save a mask to a file. 20306 Crop to Mask~Click to crop the image to the mask. 20307 Feather Mask~Click to feather the mask. 20308 Stroke Mask~Click to stroke the mask with a brush. 20309 Invert Mask~Click to invert the mask. 20310 Hide Mask~Click to show or hide the mask. 20311 Remove Holes~Click to remove holes from a mask. 20312 Chroma Mask~Click to create a mask based on a color range. 20313 Smooth Mask~Click to smooth rough areas of a mask. 20314 Create Mask from Object~Click to create a mask from the selected object. 20315 Create Object from Mask~Click to create an object from the current mask. 20316 Redo Mask~Click to redo the last mask edits. 20317 Undo Mask~Click to undo the last mask edits. 20318 Size Mask~Click to size the current mask. 20319 Mask All~Click to mask the entire image. 20400 Click to select a command in the Image menu. 20401 Size~Click to change the horizontal or vertical size of the image. 20402 Invert Image~Click to invert the image. 20404 Click to combine objects together or to the base image. 20405 Combine Selected Objects~Click to combine selected objects together. 20406 Combine All Objects~Click to combine all objects with the base image. 20407 Combine Selected Objects with Base~Click to combine selected objects with the base image. 20408 Edit Object Alpha~Click to edit the alpha channel of the selected object(s). 20409 Crop Objects~Click to crop the currently selected object(s). 20411 Expand~Click to expand the horizontal or vertical size of the image canvas. 20412 Light Studio~Click to apply lighting effects. 20413 Bevel Factory~Click to apply a bevel to the current selection. 20414 Camera Aperture~Click to apply camera focusing type of effects. 20415 Lens Flare~Click to apply a lens flare effect. 20416 Edit Web Element~Click to edit the currently selected web element. Double-click on element for quick editing. 20417 Output Wizard~Click to save the web elements to a web format. 20420 Click to rotate the image. 20421 Rotate 90° clockwise~Click to rotate the image 90° clockwise. 20422 Rotate 180 degrees~Click to rotate the image 180 degrees. 20423 Rotate 90° counterclockwise~Click to rotate the image 90° counterclockwise. 20424 Rotate Arbitrary Angle~Click to rotate at desired angle and direction. 20430 Click to select a channels command. 20431 Split RGB~Click to split into separate RGB channels. 20432 Split HSL~Click to split into separate HSL channels. 20433 Split CMYK~Click to split into separate CMYK channels. 20434 Recombine~Click to recombine the individual channel images. 20440 Click to flip the image. 20441 Flip Horizontal~Click to flip the image left to right. 20442 Flip Vertical~Click to flip the image top to bottom. 20443 Flip Diagonal~Click to flip the image diagonally. 20449 Click to select a conversion command. 20450 Convert to Line Art~Click to convert the image to line art. 20451 Convert to Scattered Line Art~Click to convert the image to scattered line art. 20452 Convert to Grayscale (8-bit)~Click to convert the image to grayscale (8-bit). 20453 Convert to Palette Colors~Click to convert the image to palette colors. 20454 Convert to RGB (24-bit)~Click to convert the image to RGB (24-bit). 20455 Convert to CMYK (32-bit)~Click to convert the image to CMYK (32-bit). 20456 Convert to Color Managed~Click to convert the image to a color managed image. 20457 Convert to Grayscale (16-bit)~Click to convert the image to grayscale (16-bit). 20458 Convert to RGB (48-bit)~Click to convert the image to RGB (48-bit). 20459 Convert to CMYK (64-bit)~Click to convert the image to CMYK (64-bit). 20511 Close All Windows~Click to close all image windows. 20515 Click to select a command in the Tools menu. 20517 Click to launch the Guides Manager. 20521 Show Info~Click to show or hide the info box. 20522 QuickZoom~Click to show or hide the QuickZoom window. 20523 Create Scratchpad~Click to create a new scratchpad. 20524 Click to show or hide the main toolbox. 20525 Click to show or hide the status line. 20526 Show Rulers~Click to show or hide image rulers. 20527 Show Task Manager~Click to show or hide the Task Manager. 20528 Grid Setup~Click to select options for the image grid. 20529 Show Grid~Click to show or hide the image grid. 20530 Snap to Grid~Click to snap objects or tool activity to the image grid. 20531 Web Pattern Viewer~Click to view the current image in a tiled view. 20532 Full Workspace Mode~Click to work in full workspace mode. 20536 Click to show or hide bubble and status hints. 20537 Click to show or hide bubble hints. 20538 Click to show or hide hints in the status line. 20550 Click to select guideline options. 20551 Snap to Guides~Click to snap objects or tool activity to image guides. 20552 Show Guides~Click to show or hide the image guides. 20553 Lock Guides~Click to lock the image guides in their current position. 20560 Click to select a command in the Object menu. 20561 Align Objects~Click to align selected object(s). 20562 Select All~Click to select all objects. Press Shift+F2 to select all but the currently selected. 20563 Feather Objects~Click to feather the edges of selected object(s). 20564 Delete Objects~Click to delete selected object(s). 20565 Hide Marquee~Click to show or hide the object marquee. 20566 Show Object Manager~Click to show or hide the Object Manager. 20567 Merge Mask~Click to apply a mask to selected object's alpha channel. 20569 Position Objects~Click to position selected object(s) precisely. 20570 Click to group/ungroup or lock/unlock objects. 20571 Group Objects~Click to group selected object(s). 20572 Ungroup Objects~Click to ungroup selected object(s). 20573 Lock Objects~Click to lock selected object(s) in place. 20574 Unlock Objects~Click to unlock selected object(s) in place. 20575 Size Object~Click to change the horizontal or vertical size of objects. 20580 Click to adjust the layering of selected object(s). 20581 Send Backward~Sends the selected object(s) down one layer. 20582 Bring Forward~Brings the selected object(s) up one layer. 20583 Send to Back~Sends the selected object(s) to the back. 20584 Bring to Front~Brings the selected object(s) to the front. 20590 Click to rotate objects to a desired angle. 20591 Object Rotate 90° clockwise~Click to rotate object(s) 90 degrees clockwise. 20592 Object Rotate 90° counterclockwise~Click to rotate object(s) 90 degrees counterclockwise. 20593 Object Rotate 180°~Click to rotate object(s) 180 degrees. 20594 Object Rotate Arbitrary Angle~Click to rotate object(s) at a desired angle and direction. 20600 Click to select a command in the Window menu. 20605 Click to activate this image for editing. 20606 Click to activate this image for editing. 20607 Click to activate this image for editing. 20608 Click to activate this image for editing. 20609 Click to activate this image for editing. 20610 Click to activate this image for editing. 20664 Chroma Masking 20700 Click to select a command in the Help menu. 20701 Help~Click for the content of help topics. 20703 Using Windows Help~Click for information on using the Windows Help System. 20704 Tip of the Day~Click to launch the current Tip of the Day. 20706 About iGrafx Image~Click for information about iGrafx Image. 20707 Error Changing to directory. 20708 Web Favorites~Click to launch the Web Favorites dialog. 20709 Office Compatible...~Click for information on using iGrafx Image with MSOffice. 20710 File corrupt. 20711 As a registered iGrafx Image user you will receive information on product updates and special offers for Micrografx customers.\n\nWould you like to register your copy of iGrafx Image now? 20801 Click to increase/decrease the amount of colors in the palette. 20802 Click to increase/decrease the amount of colors in the palette. 20804 Displays the original (unmodified) image file size. 20805 Displays the modified image file size. 20806 Click to select the original palette. 20807 Click to select the modified palette. 20808 Click to select the original (unmodified) image preview. 20809 Click to select the modified image preview. 20811 Click to add a color to the current palette. 20812 Click to update the preview of the changes made to the image. 20813 Click to reset the palette. 21001 Image Warp~Click to warp the selection to a pre-defined warp-grid. 21002 Displays the preview of the currently selected warp grid on the image. 21031 Click to position the area to remain in focus. 21032 Pick from the list of lens presets. 21033 Click to adjust the zoom factor. 21035 Click to adjust the aperture in F-Stop increments. 21036 Click to adjust the aperture in F-Stop increments. 21038 Click to adjust the amount of Light Falloff. 21039 Click to adjust the amount of Light Falloff. 21041 Click to enable/disable Light Falloff. 21042 Preview of the Lens Length with Zoom Factor. 21043 Preview of the Aperture(F-Stop). 21060 (28mm) 28 28 18 60 21061 (55mm) 55 55 56 60 21062 (55-135mm) 55 135 80 60 21063 (105mm) 105 105 80 60 21064 (70-210mm) 70 210 160 60 21065 (500mm) 500 500 220 60 21066 (Manual Mode) 0 0 0 0 21070 Last Used 21112 on ' 21113 Command Center 21114 Object Manager 21115 You need to save this image in order to enable the Command Center.\n Do you wish to save the image at this time? 21116 Are you sure you want to Commit All Selected Commands? 21117 iGrafx Image has recovered some deleted commands that might be the reason behind the failure. 21118 Compression: %ld:1 [%ld KB] Est. Time: %s 21119 macro - %s 21120 Do you want to keep commands within the Folder? 25027 Click to select previous tool. 26014 Click to Manage Toolbars. 26015 Click to Customize Toolbars. 26018 Toolbox 26019 Ribbon 26020 Status 26022 &Reset 26023 &Delete 26024 Can't Replace Main Toolbar. 26025 Can't Replace Status Bar. 26026 Can't Replace Ribbon Toolbar. 26027 File 26028 Edit 26029 View 26030 Tools 26031 Mask 26032 Mapping 26033 Image 26034 Object 26035 Window 26036 Help 26037 Selector Tool 26038 Mask Tools 26039 Retouch Tools 26040 Filter Tools 26041 Fill Tools 26042 Draw Tools 26043 View Tools 26044 Text Tool 26045 Probing Tools 26046 Macros 26047 Controls 26071 Zoom 26072 Status 26073 error reading line %d 26074 not enough memory to run filter 26077 Standard 26078 Can't Replace Standard Toolbar. 26079 Sizable Window 26082 Undo %d Actions 26083 Redo %d Actions 26098 iGrafx Share Media~Click to insert clip art with iGrafx Share Media. 26100 / 26101 No Name 26102 Save 26103 Converting DBF to 5.0 format 26104 iGrafx Image Tutorial 26105 ° 26107 Unlabeled 26110 Clipboard 26111 No File 26112 Selector Transform Tool 26113 Crop Tool 26114 Undo Group 26115 Redo Group 26116 AntiAlias 26117 Image Tools 26118 Object and Mask Tools 26119 View Tools 26120 Retouch Tools 26121 Filter Tools 26122 Fill Tools 26123 Draw Tools 26124 Color Tools 26125 Mask Tools 26126 Web Tools 26300 iGrafx Designer~Click to run iGrafx Designer. 26301 iGrafx Process~Click to run iGrafx Process. 26302 iGrafx Business 3D~Click to run iGrafx Business 3D. 26303 iGrafx Business Graphics~Click to run iGrafx Business Graphics. 26501 Japanese 26502 Japanese 26503 Active Color~Double click to change this active color %s. 26504 Alternate Color~Click to activate this alternate color %s. 26505 Color Swatch~Click to change or activate color. 26506 Area Zoom 26507 Previous View 26508 View 1:1 26509 Entire Image 26510 Full Screen 26511 YUV 4:1:1 (Low Resolution) 26512 YUV 4:2:2 (Medium Resolution) 26513 YUV 4:4:4 (High Resolution) 26550 MGX PictPub (*.ppf) 26551 MGX PictPub 5 (*.pp5) 26552 TIFF (*.tif) 26553 Adobe Illustrator (*.ai) 26554 Adobe PSD (*.psd) 26555 CompuServe Bitmap (*.gif) 26556 CompuServe PNG (*.png) 26557 CGM (*.cgm) 26558 CorelDRAW 3-5 (*.cdr) 26559 CorelDRAW! ClipArt (*.cmx) 26560 DCS Bitmap (*.dcs) 26561 EPS/AI EPS (*.eps) 26562 JPEG File Interchange (*.jpg) 26563 Kodak Photo CD (*.pcd) 26564 Macintosh PICT (*.pct) 26565 MGX Designer4 (*.ds4) 26566 MGX Designer (*.dsf) 26567 MGX Clipart (*.mgx) 26568 MGX Drawing (*.drw) 26570 MGX PictPub 4 (*.pp4) 26571 MS Video (*.avi) 26572 PC PaintBrush (*.pcx) 26573 PostScript (*.prn) 26574 PostScript (*.ps) 26575 Scitex CT (*.sct) 26576 Sun Raster (*.ras) 26577 TIFF CCITT (*.tif) 26578 Targa Bitmap (*.tga) 26579 Windows Bitmap (*.bmp) 26580 Windows DIB (*.dib) 26581 Windows WMF (*.wmf) 26584 JPEG File Interchange (*.jpeg) 27010 Build Image~Click to build the entire image without viewing the steps. 27011 Animate~Click to view all of the commands performed on the image in an animated format. 27012 Step~Click to step through the commands performed on the image one by one. 27013 Step Folder~Click to step through the next available folder in the command center. 27014 Stop~Click to stop the building or animation of the image. 27100 = %s x %s Pixels 27101 MultiProbe Size~Type an odd number to adjust the square area used for probing the image. 27102 MultiProbe Size~Click to size up or down the square area used for probing the image. 27104 MultiProbe Auto Probe~Click to auto probe the image using the settings found in the Advanced settings area. 27105 MultiProbe Math Correction~Click to color correct the image based on the colors found by the multiprobes. 27106 MultiProbe Delete All~Click to delete all probes. 27108 MultiProbe Advanced~Click to select options used for auto probing the image. 27109 Auto Probe 1 & 2~Check if you want Probes 1 & 2 to be auto probed for the image. 27110 Auto Probe 3 & 4~Check if you want Probes 3 & 4 to be auto probed for the image. 27111 Auto Probe 5 & 6~Check if you want Probes 5 & 6 to be auto probed for the image. 27112 Auto Probe 7 & 8~Check if you want Probes 7 & 8 to be auto probed for the image. 27120 You can only save an animation to a GIF file. 27121 % 27150 Single Line 27151 Double Line 27152 Triple Line 27153 Measure Tool Mode~Click to select single, double or triple line mode for the measure probe. 27154 Remove Measure Tool Lines~Click to delete all anchors of the measure tool. 28000 Save this frame back to the animation? 28021 The properties on this pane affect global animation settings. 28022 The properties on this pane affect the currently selected frame. 28023 Click to apply the size to all frames. 28024 Click to adjust the width. 28025 Click to adjust the width. 28026 Click to adjust the height. 28027 Click to adjust the height. 28028 Click to adjust how many times the animation will loop. 28029 Click to adjust how many times the animation will loop. 28030 Click to make looping apply continuously. 28031 Click to edit the palette for all frames. 28036 Click to enable/disable interlacing. 28038 Click to edit the currently selected frame's palette. 28040 Click to adjust the X offset value. 28041 Click to adjust the X offset value. 28042 Click to adjust the Y offset value. 28043 Click to adjust the delay on the current frame. 28044 Click to adjust the Y offset value. 28045 Click to adjust the delay on the current frame. 28047 Click to enable/disable global sizing on each frame. 28049 Step Backward~Click to skip Backward one frame at a time. 28051 Step Forward~Click to skip Forward one frame at a time. 28052 Play~Click to Play the animation. 28053 Stop~Click to Stop playback of the animation. 28054 Edit Frame~Click to Edit the current frame in iGrafx Image. 28055 Click to enable/disable a user inputed disposal method. 28056 The way in which an animation frame gets replaced by the next frame. 28057 Insert Frame~Click to insert a new frame at the current placement. 28058 Delete Frame~Click to delete the currently selected frame. 28060 Delete current frame? 28061 Frame 28062 Frame %d 28063 Untitled 28064 Number out of range.\nPlease enter a value between %d and %d. 28065 This frame is currently using the global palette\nDo you want to create a local palette for this frame? 28066 You are about to delete the local palette associated with this image.\nThe image will be remapped to the global palette.\nThe local palette information will be lost.\nThis operation cannot be undone.\n\nContinue? 28079 GIF Animator~Click to view the GIF Animator dialog window. 28080 The properties on this pane display and modify frames in the frame list. 28081 Displays all frames in textual form. 28082 Move the currently selected frame up in order. 28083 Move the currently selected frame down in order. 28090 Undefined 28091 Don't remove 28092 Background 28093 Previous 28094 Click to use a local palette for the current frame. 28203 Click to view the animation as if it were on a web page (actual size). 28204 Click to use a transparent color for the animation. 28211 Click to adjust the width setting of the new animation. 28212 Click to adjust the height setting of the new animation. 28215 Click to adjust the number of frames in the new animation. 28217 Click to use a Netscape Navigator palette in the new animation. 28218 Click to use a Microsoft Internet Explorer palette in the new animation. 28219 Click to use a custom palette in the new animation. 28220 Click to select a palette from the list. 28221 Netscape Palette 28222 MS Internet Explorer 28243 Frame: %d 28244 Vertical 28245 Horizontal 32000 Map Name 32001 Printer Style Name 32002 Halftone Style Name 32003 Calibration Name 32004 Separation Style Name 32005 Black Generation Name 32006 Special Filter Name 32007 Scanner Name 32008 Grabber Name 32010 Texture Name 32011 Clipboard Name 32012 Mask Name 32013 Brush Name 32014 Calibration Name 32015 Palette Name 32016 Color Manager Name 32020 Brush Style Name 32078 Export Filter Name 32079 Macro Name 32080 Adjustment Table Name 32600 Rotate90 32601 Rotate180 32602 Rotate270 32603 Rotate %s %d 32604 OpenFile "%s" "%s" %d %d "%s" %d "%s" %s 32605 Size %s %s %d %d %d 32606 Invert 32607 Expand %s %s %s %s %d %s %d 32608 FlipHorizontally 32609 FlipVertically 32610 FlipDiagonally 32611 Convert %d "%s" %d "%s" %d %d %d "%s" 32612 Gradient %d %d %d %d "%s" %d %d %d %d %d %d %d %d %d %d %d %d 32613 TintFill %d "%s" %d %s 32614 Clear 32615 Cut 32616 TextureFill %d "%s" "%s" %d %d %d 32617 SmartFill %d "%s" %d %s %d %d %d %d %s %d %d %d 32618 ContrastBrightness %d %d %d %d %d 32619 ColorBalance %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d 32620 Map %d %d %d %d %d 32621 OpenFileLowRes "%s" "%s" %d %d %d "%s" %d "%s" %s 32622 SaveFile "%s" %d %d %d "%s" %d "%s" %s 32624 ToneBalance %d %d %d %d %d 32625 Posterize %d %d %d %d %d %d %d %d %d %d 32626 HueMap %d %d %d 32627 ApplyCalibration "%s" "%s" 32628 ShapeMask %d %d %d %d %d %d %d %d 32629 FreehandMask %d %d %d %d 32630 SmartMask %d %d %d %d %s %d %d %d %d 32631 TransformMask %d %d %d %d %d %d %d %d "%s" %d %d %d %d %d %d %d %d %d %d %d 32632 TransformObjects %d %d %d %d %d %d %d %d %d %d 32633 SelectObjects %d %d %d %d %d %d %d 32634 MoveObjects %d %d %d 32635 SetObjectsTransparency %d 32636 OrderObjectsUp 32637 GroupObjects 32638 DuplicateObjects %d %d 32639 MergeMask 32640 PasteFrom %d "%s" %d %d %d %d %d %d %d %d %d %d %d "%s" "%s" %d "%s" %d "%s" %d 32641 Paste %d "%s" %d %d %d %d %d %d %d %d %d %d %d %d 32642 LoadMask %d %d %d %d %d %d %d %d %d %d %d "%s" %d "%s" 32643 Effect "%s" "%s" %d 32644 RemoveMask 32645 InvertMask 32646 FeatherMask %d %d %d %d 32647 FeatherObject %d %d %d %d 32648 Text "%s" %d %d %d %d %d %d %d %d %d %d %d %d %s %d "%s" %d %d %d %d 32649 EditMaskChannel 32650 CombineObjects 32651 ActivateWindow "%s" %d 32652 NewImage %d %s %s %d %d %s %d "%s" %d "%s" 32653 EditUndo 32654 MaskUndo 32655 EditApply 32656 CopyToFile "%s" %d %d 32657 TransformImage %d %d %d %d %d %d %d %d "%s" %d %d %d %d %d %d %d %d %d %d %d 32658 CopyToNewImage 32659 PaintBrush "%s" %d "%s" %d %d %d %d %d %d "%s" %d %s %d 32660 AirBrush "%s" %d "%s" %d %d %d %d %d %d "%s" %d %s %d 32661 CloneBrush "%s" %d "%s" %d %d %d %d %d %d %d "%s" "%s" %d %d %d %d 32662 TextureBrush "%s" %d "%s" %d %d %d %d %d %d "%s" "%s" %d %d 32663 SmearBrush "%s" %d "%s" %d %d %d %d %d %d "%s" %d 32664 EraserBrush "%s" %d "%s" %d %d %d %d %d %d "%s" %d %s %d 32665 SharpenBrush "%s" %d "%s" %d %d %d %d %d %d %d %d 32666 SmoothBrush "%s" %d "%s" %d %d %d %d %d %d %d %d 32667 LightenBrush "%s" %d "%s" %d %d %d %d %d %d %d %d 32668 DarkenBrush "%s" %d "%s" %d %d %d %d %d %d %d %d 32669 PaintOnMaskBrush %d "%s" %d %d %d %d %d %d %d %d %d 32670 UndoEraserBrush %d "%s" %d %d %d %d %d %d %d 32671 DrawShape %d %d %d %d %d %d %d "%s" %d "%s" %d %d %d "%s" %d %s %d %s %d 32672 DrawFreehand %d "%s" %d "%s" %d %d %d "%s" %d %s %d %s %d %d %d 32673 DrawPencil %d "%s" %d "%s" %d %d %d "%s" %d %s %d %s %d %d %d 32674 PaletteEdit %d %d %d 32675 ObjectAlign %d %d %d %d 32676 SetObjectsMergeMode "%s" 32677 OrderObjectsDown 32678 OrderObjectsToTop 32679 OrderObjectsToBottom 32680 CombineSelObjects 32681 ObjectPosition %d %d %d 32682 ObjectLock 32683 ObjectCombineObjects 32684 PluginFilter "%s" %d %ld 32685 Crop %d %d %d %d %d 32686 CropToMask 32687 CloseImage 32688 SaveToAlbum "%s" "%s" %d %d %s 32689 RemoveHoles 32690 CreateClipObject 32691 ChromaMask %d %d %d %d %d %d %d %d %d %d %d %d %d 32692 MaskSmooth %d %d %d 32693 MaskFromObject %d %d %d %d %d %d %d %d %d %d %d 32694 ObjectFromMask %d %d 32695 ObjectUnLock 32696 UnGroupObjects 32697 PointEditMask %d %d %d %d %d %d %d %d %d 32698 SimilarMask %d %d %d %d %s %d %d %d %d 32699 FastBits "%s" "%s" %d %d %d %d %d "%s" %d "%s" 32700 DeleteObjects 32701 StrokeMask %d "%s" %d "%s" %d %d %d %d %d "%s" %d %s %d "%s" 32702 SelectObjectRelative %d %d 32703 ObjectLayering %d 32704 CopyToClipboard 32705 SaveMask "%s" 32706 Threshold %d %d %d %d %d %d %d %d %d %d 32707 HueShift %d %d %d 32708 EditText "%s" %d %d %d %d %d %d %d %d %d %d %d %d %s %d "%s" %d %d %d 32709 DiscardUndo %d 32710 Group "%s" "%s" %d 32711 Branch "%s" "%s" %d 32712 EndGroup %d 32713 RotateObjects90 32714 RotateObjects180 32715 RotateObjects270 32716 RotateObjectsAny %s %d 32717 HideObjects %d 32718 ShowObjects %d 32719 LockObjects %d 32720 UnlockObjects %d 32721 AlphaEditObjects %d 32722 CropObjects %d %d %d %d %d 32723 LayerObjects %d %d %d 32724 NameObject %d "%s" 32725 ImageSpray %d %d %d %d %d %d "%s" %s 32726 ImportFromFile "%s" %d 32727 SizeObject %s %s %d %d %d %d 32728 Grow/Shrink %d %d %d %d 32729 EditRedo 32730 EditProperty %d %d %d %d "%s" 32731 SelectObject %d %d 32732 ImageWarp %d %d %d %d %d %d %d %d %d %d "%s" "%s" 32733 Aperture %d %d %d %d %d %d %d %d %d %d 32734 LightStudio %d %d %d %d %d %d %d %d %d %d %d "%s" %d %d %d 32735 BevelFactory %d %f %f %f "%s" %d %d "%s" %d %d %d %d %d %d %d %d %d "%s" 32736 LensFlare %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d "%s" %d "%s" %d "%s" %d "%s" %d %d 32737 MirrorHorizontally 32738 MirrorVertically 32739 MirrorDiagonally 32740 BubbleFactory %f %f %f %d %d "%s" %d %d %d %f %f %d %d %d %d 32741 SelectColorChannel %d %d %d 32742 SendToMaskChannel %d %d %d 32743 Snapshot 32744 PurgeUndo 32745 PurgeSnapshot 32746 MaskRedo 32747 MultiProbe %d %d %d %d %d %d 32748 MeasureProbe %d %d %d 32749 ChannelMixer %d %d %d %d %d %d 41000 Save Ribbon Settings~Click to save settings for the Selector tool. 41001 Save Ribbon Settings~Click to save settings for the Transformer tool. 41003 Save Ribbon Settings~Click to save settings for the Crop tool. 41009 Save Ribbon Settings~Click to save settings for the Text tool. 41010 Save Ribbon Settings~Click to save settings for the Color Probe tool. 41015 Save Ribbon Settings~Click to save settings for the Warp tool. 41019 Save Ribbon Settings~Click to save settings for the Paint On Mask tool. 41020 Save Ribbon Settings~Click to save settings for the Freehand Mask tool. 41021 Save Ribbon Settings~Click to save settings for the Shape Mask tool. 41023 Save Ribbon Settings~Click to save settings for the Smart Mask tool. 41025 Save Ribbon Settings~Click to save settings for the Mask Transform tool. 41026 Save Ribbon Settings~Click to save settings for the Mask Point Editing tool. 41028 Save Ribbon Settings~Click to save settings for the Path Editing tool. 41030 Save Ribbon Settings~Click to save settings for the Paint tool. 41031 Save Ribbon Settings~Click to save settings for the Airbrush tool. 41032 Save Ribbon Settings~Click to save settings for the Clone tool. 41033 Save Ribbon Settings~Click to save settings for the Texture tool. 41034 Save Ribbon Settings~Click to save settings for the Smear tool. 41035 Save Ribbon Settings~Click to save settings for the Eraser tool. 41036 Save Ribbon Settings~Click to save the settings for the Image Spray Tool. 41040 Save Ribbon Settings~Click to save settings for the Sharpen tool. 41041 Save Ribbon Settings~Click to save settings for the Smooth tool. 41042 Save Ribbon Settings~Click to save settings for the Lighten tool. 41043 Save Ribbon Settings~Click to save settings for the Darken tool. 41044 Save Ribbon Settings~Click to save settings for the Stitch tool. 41050 Save Ribbon Settings~Click to save settings for the Gradient Fill tool. 41051 Save Ribbon Settings~Click to save settings for the Smart Fill tool. 41052 Save Ribbon Settings~Click to save settings for the Texture Fill tool. 41053 Save Ribbon Settings~Click to save settings for the Color Tint Fill tool. 41060 Save Ribbon Settings~Click to save settings for the Pencil tool. 41061 Save Ribbon Settings~Click to save settings for the Shape Draw tool. 41062 Save Ribbon Settings~Click to save settings for the Freehand Draw tool. 41079 Save Ribbon Settings~Click to save settings for the View tool. 41100 Click or drag to select an object or group of objects. 41101 Click or drag to transform an object or group of objects. 41103 Press and drag to crop the image. 41109 Click to type text directly on screen. 41110 Press and drag to select new active color. 41119 Press and drag to paint on the mask channel. 41120 Click or press and drag to draw a freehand mask. (Bksp to delete last point.) 41121 Press and drag to create a Shape mask. 41123 Click to mask an area automatically. 41125 Click or press and drag to select masks for transforming. 41126 Click or press and drag to select a mask for point editing. 41128 Click or press to start creating a path. 41130 Press and drag to paint with the active color. 41131 Press and drag to spray the active color like an airbrush. 41132 Press and drag to copy pixels. (Press Shift to reposition.) 41133 Press and drag to paint with a texture. 41134 Press and drag to smear pixels. 41135 Press and drag to erase edits. 41136 Press and drag to spray a collection of predefined objects. 41140 Press and drag to sharpen pixels. 41141 Press and drag to smooth pixels. 41142 Press and drag to lighten pixels. 41143 Press and drag to darken pixels. 41144 Press and drag to place the stitch markers. 41150 Press and drag to select gradient area. 41151 Click to automatically fill an area of like colors with the active color. 41152 Click to fill with a texture. 41153 Click to fill with the active color. 41160 Click to draw new lines. (Press Bksp to delete last.) 41161 Press and drag to draw a rectangle/ellipse. 41162 Click to draw new lines. (Press Bksp to delete last) 41179 Press and drag to magnify a rectangular area. 41181 Click to zoom out. 41200 Selector tool 41201 Selector Transform tool 41203 Crop tool 41209 Text tool 41210 Color Probe tool 41215 Warp tool 41219 Paint On Mask tool 41220 Freehand Mask tool 41221 Shape Mask tool 41223 Smart Mask tool 41225 Mask Transform tool 41226 Mask Point Editing tool 41227 Transform tool 41228 Path Editing tool 41230 Paint tool 41231 Airbrush tool 41232 Clone tool 41233 Texture tool 41234 Smear tool 41235 Eraser tool 41236 Image Spray tool 41240 Sharpen tool 41241 Smooth tool 41242 Lighten tool 41243 Darken tool 41244 Stitch tool 41250 Gradient Fill tool 41251 Smart Fill tool 41252 Texture Fill tool 41253 Color Tint Fill tool 41260 Pencil tool 41261 Shape Draw tool 41262 Freehand Draw tool 41279 View tool 42001 Creating Text... %d%% complete. Press and hold ESC to cancel. 42002 Clearing... %d%% complete. Press and hold ESC to cancel. 42003 Cutting... %d%% complete. Press and hold ESC to cancel. 42004 Editing Text... %d%% complete. Press and hold ESC to cancel. 42030 Gradient filling... %d%% complete. Press and hold ESC to cancel. 42031 Texture filling... %d%% complete. Press and hold ESC to cancel. 42032 Tint filling... %d%% complete. Press and hold ESC to cancel. 42033 Smart filling... Press and hold ESC to cancel. 42040 Drawing with pencil... %d%% complete. 42041 Drawing shape... %d%% complete. 42042 Drawing freehand... %d%% complete. 42050 Transforming... %d%% complete. Press and hold ESC to cancel. 42051 Transforming... %d%% complete. Press and hold ESC to cancel. 42060 Sizing image... %d%% complete. Press and hold ESC to cancel. 42061 Rotating image 90 degrees... %d%% complete. Press and hold ESC to cancel. 42062 Rotating image 180 degrees... %d%% complete. Press and hold ESC to cancel. 42063 Rotating image 90 degrees... %d%% complete. Press and hold ESC to cancel. 42064 Rotating image... %d%% complete. Press and hold ESC to cancel. 42065 Flipping horizontally... %d%% complete. Press and hold ESC to cancel. 42066 Flipping vertically... %d%% complete. Press and hold ESC to cancel. 42067 Flipping diagonally... %d%% complete. Press and hold ESC to cancel. 42068 Inverting Image... %d%% complete. Press and hold ESC to cancel. 42069 Combining all objects... %d%% complete. Press and hold ESC to cancel. 42070 Expanding image... %d%% complete. Press and hold ESC to cancel. 42071 Merging Mask... %d%% complete. Press and hold ESC to cancel. 42073 Pasting... %d%% complete. Press and hold ESC to cancel. 42074 Feathering Mask... %d%% complete. Press and hold ESC to cancel. 42075 Cropping image... %d%% complete. Press and hold ESC to cancel. 42076 Reducing colors... %d%% complete. Press and hold ESC to cancel. 42077 Converting image... %d%% complete. Press and hold ESC to cancel. 42078 Removing Holes... 42079 Smoothing Mask... %d%% complete. Press and hold ESC to cancel. 42090 Applying map... %d%% complete. Press and hold ESC to cancel. 42091 Applying tone balance... %d%% complete. Press and hold ESC to cancel. 42092 Adjusting constrast/brightness... %d%% complete. Press and hold ESC to cancel. 42093 Posterizing... %d%% complete. Press and hold ESC to cancel. 42094 Applying hue map... %d%% complete. Press and hold ESC to cancel. 42095 Adjusting color balance... %d%% complete. Press and hold ESC to cancel. 42096 Applying calibration map... %d%% complete. Press and hold ESC to cancel. 42097 Palette edit... %d%% complete. Press and hold ESC to cancel. 42098 Applying hue shift... %d%% complete. Press and hold ESC to cancel. 42099 Thresholding... %d%% complete. Press and hold ESC to cancel. 42104 Smart Masking... Press and hold ESC to cancel. 42107 Inverting mask...%d%% complete. Press and hold ESC to cancel. 42110 Loading mask...%d%% complete. Press and hold ESC to cancel. 42111 Stroking mask...%d%% complete. 42112 Expanding Smart Mask... %d%% complete. Press and hold ESC to cancel. 42122 Feathering Object... %d%% complete. Press and hold ESC to cancel. 42136 Applying special effect... %d%% complete. Press and hold ESC to cancel. 42138 Combining selected objects... %d%% complete. Press and hold ESC to cancel. 42141 Combining objects together... %d%% complete. Press and hold ESC to cancel. 42146 Masking similar color areas... %d%% complete. Press and hold ESC to cancel. 42147 Processing... %d%% complete. Press and hold ESC to cancel. 42148 Processing... %d%% complete. 42149 Loading image... %d%% complete. Press and hold ESC to cancel. 42150 Saving image... %d%% complete. Press and hold ESC to cancel. 42151 Loading low resolution image... %d%% complete. Press and hold ESC to cancel. 42152 Building display tables... %d%% complete. Press and hold ESC to cancel. 42153 Opening color manager. Press and hold ESC to cancel. 42154 Querying color manager database. Press and hold ESC to cancel. 42155 Loading image... %d%% complete. 42156 Printing image... %d%% complete. Press and hold ESC to cancel. 42157 Pasting from clipboard... %d%% complete. Press and hold ESC to cancel. 42158 Copying to file... %d%% complete. 42159 Copying to clipboard... %d%% complete. 42160 Stitching images... %d%% complete. Press and hold ESC to cancel. 42161 Pasting from file... %d%% complete. Press and hold ESC to cancel. 42162 Splitting channels... %d%% complete. Press and hold ESC to cancel. 42163 Combining channels... %d%% complete. Press and hold ESC to cancel. 42164 Packaging PP5 file... %d%% complete. Press and hold ESC to cancel. 42165 Saving mask... %d%% complete. Press and hold ESC to cancel. 42166 Loading fastbits chunk... %d%% complete. Press and hold ESC to cancel. 42167 Rendering requested data... %d%% complete. 42168 Building image... %d%% complete. Press and hold ESC to cancel. 42182 Sizing Objects... %d%% complete. Press and hold ESC to cancel. 42185 Warping Image... %d%% complete. Press and hold ESC to cancel. 42186 Aperture... %d%% complete. Press and hold ESC to cancel. 42187 Light Studio... %d%% complete. Press and hold ESC to cancel. 42188 Bevel Factory... %d%% complete. Press and hold ESC to cancel. 42189 Lens Flare... %d%% complete. Press and hold ESC to cancel. 45703 Save Ribbon Settings~Click to save settings for the MultiProbe tool. 45704 Save Ribbon Settings~Click to save settings for the Measure Tool. 45801 Click to Probe color on a point. 45802 Click and drag to Probe a rectangle. 45903 MultiProbe tool 45904 Measure tool 57347 %1 in %2 57349 %1 - %2 57648 New Window~Click to duplicate the image window. 57649 Arrange Icons~Click to arrange icon images. 57650 Cascade Windows~Click to cascade image windows. 57651 Tile Windows~Click to tile image windows. 57669 Help~Lets you get help on a command or a control. 60464 Creating Chroma Mask...%d%% complete. 61440 Open 61441 Save As 61442 All Files (*.*) 61443 Untitled 61444 Save Copy As 61446 an unnamed file 61457 &Hide 61472 No error message is available. 61473 An unsupported operation was attempted. 61474 A required resource was unavailable. 61475 Out of memory. 61476 An unknown error has occurred. 61577 &Update %1 61580 E&xit && Return to %1 61581 Updating ActiveX objects 61582 Picture (Metafile)\na picture 61583 Device Independent Bitmap\na device independent bitmap 61584 Bitmap\na bitmap 61585 %s\n%s 61586 %s\n%s 61588 Linked %s 61589 Unknown Type 61590 Rich Text (RTF)\ntext with font and paragraph formatting 61591 Unformatted Text\ntext without any formatting 61592 Invalid Currency. 61593 Invalid DateTime. 61594 Invalid DateTimeSpan. 61696 Invalid filename. 61697 Failed to open document. 61698 Failed to save document. 61699 Save changes to %1? 61700 Failed to create empty document. 61701 The file is too large to open. 61702 Could not start print job. 61703 Failed to launch help. 61704 Internal application error. 61705 Command failed. 61706 Insufficient memory to perform operation. 61707 System registry entries have been removed and the INI file (if any) was deleted. 61708 Not all of the system registry entries (or INI file) were removed. 61709 This program requires the file %s, which was not found on this system. 61710 This program is linked to the missing export %s in the file %s. This machine may have an incompatible version of %s. 61712 Please enter an integer. 61713 Please enter a number. 61714 Please enter an integer between %1 and %2. 61715 Please enter a number between %1 and %2. 61716 Please enter no more than %1 characters. 61717 Please select a button. 61718 Please enter an integer between 0 and 255. 61719 Please enter a positive integer. 61720 Please enter a date and/or time. 61721 Please enter a currency. 61728 Unexpected file format. 61729 %1\nCannot find this file.\nPlease verify that the correct path and file name are given. 61730 Destination disk drive is full. 61731 Unable to read from %1, it is opened by someone else. 61732 Unable to write to %1, it is read-only or opened by someone else. 61733 An unexpected error occurred while reading %1. 61734 An unexpected error occurred while writing %1. 61824 Can not activate a static ActiveX object. 61825 Failed to connect.\nLink may be broken. 61826 Unable to process command, server busy. 61827 Failed to perform server operation. 61828 The file is not supported by a Document Object server. 61829 %1\nUnable to register document.\nThe document may already be open. 61830 Failed to launch server application. 61831 Update %1 before proceeding? 61832 Could not update client. 61833 Failed to register. ActiveX features may not work properly. 61834 Failed to update the system registry.\nPlease try using REGEDIT. 61835 Failed to convert ActiveX object. 61836 Unable to read write-only property. 61837 Unable to write read-only property. 61838 ActiveX objects cannot be saved while exiting Windows!\nDiscard all changes to %1? 61839 Failed to create object. Make sure the application is entered in the system registry. 61840 Unable to load mail system support. 61841 Mail system DLL is invalid. 61842 Send Mail failed to send message. 61856 No error occurred. 61857 An unknown error occurred while accessing %1. 61858 %1 was not found. 61859 %1 contains an invalid path. 61860 %1 could not be opened because there are too many open files. 61861 Access to %1 was denied. 61862 An invalid file handle was associated with %1. 61863 %1 could not be removed because it is the current directory. 61864 %1 could not be created because the directory is full. 61865 Seek failed on %1 61866 A hardware I/O error was reported while accessing %1. 61867 A sharing violation occurred while accessing %1. 61868 A locking violation occurred while accessing %1. 61869 Disk full while accessing %1. 61870 An attempt was made to access %1 past its end. 61872 No error occurred. 61873 An unknown error occurred while accessing %1. 61874 An attempt was made to write to the reading %1. 61875 An attempt was made to access %1 past its end. 61876 An attempt was made to read from the writing %1. 61877 %1 has a bad format. 61878 %1 contained an unexpected object. 61879 %1 contains an incorrect schema. 61888 pixels